Farmall Super M Parts List

Yesterday's Tractor Co.
www.yesterdaystractors.com
(800) 853-2651

Category: Brakes

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Bonded Lined Brake Disc - These Bonded Lined Brake Disc measure 6-1/2 inches x 3-1/2 inches and have 12 splines on center hub. For tractor models M and MV serial number 2942236 and up. MD and MDV serial number 285505 and up. Super M and MD; W6 serial number 45847 and up. WD6 serial number 45301 and up, Super W6 and WD6; 400, W400, 450, W450. Combines: 141 and 141 Hillside, 151 Hillside gas and LP, 181, 403, 503, 615, 715, to serial number 23000, 815. Cotton Pickers: 414, 416, 420, 422, 616. Replaces 357117R91, 368181R92, ABC453. PRICED EACH. If you order 1, you will receive 1 disc. (Part No: 105444) ... $19.00

Brake Actuating Spring - Used with disc brakes. For tractor models (M from serial number 294226 and up), (MD from serial number 285505 and up), Super M, Super MTA, Super MV, Super MDV, Super W6, Super W6TA, Super WD6, OS6, ODS6, 400, 450, W400, W450, 560, 656, 660, 664, 666, 686, Hydro 70, Hydro 86. Replaces A30897, A41816. Replaces 357116R1, 619731C1, 72504717V. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105 inch. (Part No: 113798) ... $1.70

Brake Disc Adjusting Bolt -

For International / Farmall tractor models M (s/n 294226-later), MD (s/n 285505 - later), Super M, Super MTA, Super W6, 400, 450
Replaces International OEM number 357040R1
7/16"-20 UNF x 4-1/2"

(Part No: 126208) ... $13.30

No
Picture

Brake Housing Cup, Used -

For International tractor models M, Super C, Super M, Super MTA, 200, 230, 240, 330, 340, 400, 450, 460, 560, 660
Compatible with International Combine(s) 403
Replaces International OEM nos 357101R1
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 447356) ... $22.51

Brake Kit -

For International / Farmall tractor models M, Super M, Super MTA, 400, 450
Compatible with International Combine (s) 403, 503, 615, 715, 815
Compatible with International Harvester (s) 414, 420, 616, 622, 782, 1400
Replaces International OEM number 121961, 830617, 619731
Kit Includes: (2) Brake Discs, (5) Steel Balls, and (3) Brake Springs

(Part No: 162746) ... $58.00

Brake Pedal Return Spring - For tractor models: 300, Super M, Super MD, Super MTA, Super W6, Super W6TA, OS6, ODS6, Super H, Super HV, 350, 400, 450, W400, W450, 460, 560, 660. Replaces IHS873. (Part No: 165220) ... $11.40

Brake Pedal Shaft - For tractor models (M, MV serial number 294226 and up with disc brakes), (MD, MDV serial number 285505 and up with disc brakes), Super M and MTA, W6, WD6, Super W6, 400, 450. Shaft, brake pedal. Does not include cotter key and two shaft keys. (Part No: 105411) ... $78.00

Brake Pedal Shaft Seal - This brake pedal shaft seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. It Fits: 230, 3514, B-450, C, H, HV, I6, ID6, M, MD, MDV, MTA, MTAV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6, Super W6TA, Super WD6TA, W4, W6, W6TA, WD6, 200, 240, 300, 330, 340, 350, 3600A, 3616, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 400, W400, 450, W450, 8000, Hydro 70, Hydro 86. Replaces: 354514R91, 360076R92, 364471R91, 380959R91, 380960R91, 47169A, 555397R91, 581646R91, U17944, 476838 (Part No: 153586) ... $15.60

Brake-Actuating Assembly - Fits tractor models 400, 450, M with serial number higher than 294226, (MD, MDV both with serial number 285505 and up), (MV with serial number 294226 and up), Super M, and Super MTA. (Part No: 105437) ... $243.00

Clutch And Brake Pedal Shaft -

For International / Farmall tractor models M, Super M, Super MTA, Super W6, W6, W400, W450 (all with Disc Brakes), 400, 450
Replaces International OEM number 357046R1
24.75" Long
1.13" Diameter
Bare Metal

(Part No: 115109) ... $77.00

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Part No: 126209) ... $2.30

Disc Brake Boot - This Boot is used on Tractors with Disc Brakes. Used on Farmall MTA, ODS6, OS6, Super M, Super MD, Super MDV, Super MV, Super W6, Super W6TA, Super WD6, 400, 450. Replaces 357044R1 (Part No: 112347) ... $6.60

Category: Clutch

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Bearing - Pilot - New Pilot Bearing. 25mm (.9843 inch) inside diameter, 52mm (2.0472 inch) outside diameter with seals on both sides. For tractors: 400, 450, 500, 560, 600, 660, H, HV, M, M500, MD, MDV, MV, Super H, Super M, Super MD, Super MTA, Super W4, Super W6, W4, W6, WD6. (Part No: 100023) ... $5.80

Bearing, Clutch - Clutch release bearings, 3.697 inch outside diameter, 2.249 inch inside diameter, .7970 inch wide bore. Tractors: M, MD, Super M, Super MD, W6, WD6. For M, MD, Super M, Super MD, W6, WD6. (Part No: 100013) ... $30.60

CLUTCH ALIGNMENT TOOL - CASE/IH MODELS with 10 splines with 1 1/2 inch hub discs. (Part No: 118538) ... $19.80

Clutch Disc - 12 inch, spring loaded, 1.500 inch spline diameter, 10 spline. For tractor models M, MD with serial number FBK294708 and above. Super M, Super MD. (Part No: 172395) ... $254.00

Clutch Disc - TORQUE AMPLIFIER Clutch Disc. This disc is a 7 inch disc with 14 splines. For tractor models Super M, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2544, 2656. (Part No: 113817) ... $126.00

Clutch Disc, 12in - Organic, spring loaded, 1.500 inch spline diameter, 10 spline. For tractor models M, MD, MDV, MV all with serial number FBK294708 and above. Super M, Super MD. (Part No: 172395) ... $254.00

Clutch Disc, 12in - Rockford Style 1.500 inch, 10 spline. For tractor models M, MD, MV, MDV all with serial number FBK294708 and above. Super M, Super MD. (Part No: 172395) ... $254.00

Clutch Disc, Remanufactured - 12" 6 Button, 1.500", 10 spline. For tractor models M, MD with SN# FBK294708 and above. Super M, Super MD. (A refundable $20 core charge will be added to this part). (Part No: 206015) ... $175.50

Clutch Disc, Remanufactured -

For International / Farmall tractor models M, Super M, Super W6
Clutch Size: 12"
Clutch Hub: 1-1/2"
Clutch Spline: 10
Clutch Center: Spring
Clutch Type: Woven

(Part No: 205052) ... $108.01

No
Picture

Clutch Kit, Remanufactured -

For International / Farmall tractor models MD (s/n FBK294708-later), Super M
Clutch Diameter - 12"
Clutch Hub Diameter - 1-1/2"
Clutch Splines - 10
Clutch Center - Spring or Solid
Clutch Type - Woven
Pressure Plate Size - 12"
Pressure Plate Levers - 3
Pressure Plate Springs - 12
Pressure Plate Type - Single Stage
For Pressure Plate use Item #: 100023
Additional Handling and Oversize Fees Apply To This Item

(Part No: 202005) ... $238.01

Clutch Pedal Return Spring - This Clutch Pedal Return Spring is 6 inches total length. It fits H, HV, M, MD, O6, ODS6, OS4, OS6, Super H, Super HV, (Super M, Super MD both up to serial number 60000), Super MTA, W4, W6, W6TA, WD6; Replaces: 49444DA. (Part No: 126155) ... $19.00

Clutch Release Bearing Carrier - This Release Bearing Carrier is used on Farmall M, MD, MDV, MV, Super M, Super MTA. Uses 6182379R91 Release Bearing (not included). (Part No: 172968) ... $85.00

No
Picture

Clutch Release Bearing Carrier, Used -

For International tractor models M, MD, MV, Super M, Super MTA
Replaces International OEM nos 6932D
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 460940) ... $47.01

Clutch Release Bearing Carrier, Used -

For International tractor models M, MD, MDV, MV, Super M, Super MTA
Replaces International OEM number 6932D
For a new version of this item use Item #: 172968
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 460941) ... $46.01

Clutch Release Fork, Used -

For International tractor models M, MD, Super M, Super MTA, 400, 450, 560, 660
Replaces International OEM nos 5800DB
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 497006) ... $77.01

Clutch Release Sleeve Carrier - For model M, Super M, SUper MTA. (Part No: 109387) ... $93.00

Clutch Release Sleeve Carrier, Used -

For International tractor models M, Super M
Replaces International OEM number 6758D
For a new version of this item use Item #: 109387
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 409387) ... $45.01

Pressure Plate - Pressure Plate, 12 inch, 12 spring, 3 levers adjust on pivot point, 1.750 inch spline diameter, 17 spline. Flywheel step, 1.406 inch. For tractor models 400, 450, 500, 560, 600, 660, Super MTA. Replaces: 359121R97, 359121R96, 359121R95, 359121R94, 359121R93, 359121R92, 359121R91, 360079R94, 360079R93, 360079R91, 359041R93, 360080R91. (Part No: 166108) ... $510.00

No
Picture

Pressure Plate - This pressure plate is 12 inches, 3 lever and 12 spring. For Models (M, MD, MDV, MV all after serial number FBK294707), Super M prior to serial number 60000, Super MD, Super MTA prior to serial number 60000, W9, Farmall 450. Replace part numbers 360079R and 360079RN. (Part No: 192515) ... $368.00

Pressure Plate, Remanufactured -

For International / Farmall tractor models M, Super M, Super W6
Pressure Plate Size: 12"
Pressure Plate Levers: 3
Pressure Plate Springs: 12
Pressure Plate Type: Single Stage
Additional Handling and Oversize Fees Apply To This Item

(Part No: 206086) ... $160.22

Category: Cooling System

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Cooling Fan - 4 Blade, Used -

For International tractor models M, MD, Super M, Super MTA, 400, 450
Replaces International OEM number 353727R92
4 metal blades
For a new version of this item use Item #: 100769
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435278) ... $17.01

Fan - This four blade fan is for M, Super M, MD, Super MD, Super MTA. Replaces 20307DX, 353727R92 (Part No: 100769) ... $48.80

Fan Belt - This Fan Belt measures 7/8 x 45 7/8 inches. For C248, C264, and C281 gas engines and C248 diesel in: 400, 450, 6, B450, M, MD, ODS6, Super M, Super MD, Super W6, Super WD6, W400, W450, WD6. Please verify measurements before ordering (Part No: 108776) ... $19.80

Radiator - Made of copper and has a hole in radiator for the steering shaft. For tractor models M, Super M, MD, Super MD, MTA, Super MTA, W6, Super W6, WD6. Note: If replacing a NON-pressure radiator, you will have to replace the temperature gauge with part number 67135D. (gauge NOT supplied). Weight 36 pounds. Replaces 352629R92. For radiator cap order part number 67448DD. (Part No: 101709) ... $497.15

No
Picture

Radiator -

For International / Farmall tractor models M, Super M
Replaces International OEM number 357339R91, 357158R92
Overall Height: 27-1/4"
Overall Width: 20"
Core Height: 21-3/4"
Core Width: 18-3/4"
Depth: 2-11/16"
Rows: 4
Fins Per Inch: 8
Fill Neck Height: 3/4"
Inlet: 2"
Outlet: 2"
For 3 row version use Item #: 101709
Additional Handling and Oversize Fees Apply To This Item

(Part No: 152357) ... $650.00

Radiator Cap - 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 400, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Part No: 112331) ... $6.60

Radiator Cap - Fits Super A, Super C, Super H, M, MD, Super M, MD, 4, Super W4, O6, W6, ODS6, Super W6 and WD6, W9, WD9, Super W9 and WD9. Not for short filler neck. (Part No: 112290) ... $7.80

Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. (** = FOR SHORT FILLER NECK). Fits **Super H, **Super M, MD, **Super W4, **Super W6 and WD6, **Super W9 and WD9, **100, **130, **140, **200, **230, 240, **300, **330, 340, **350, **400, 404, **424, **444, **450, **460, **504, **560, 606, **660, 2424, 2444, 2504, 2606, 4100, 4156, 4166. Replaces OEM 393229R91. (Part No: 112331) ... $6.60

Radiator Cap With Lever - Pressure cap with lever. For C, H, M, MD, O6, ODS6, Super C, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9, Super A, W4, W6, W9, WD9 (Part No: 110150) ... $17.00

Radiator Hose Kit - Radiator hose kit for tractors: M serial number 109445 and up, Super M, 400 and 450 diesel. Hoses (1) 2-1/8 inch inside diameter x 4 inch length, (1) 2 inch inside diameter x 2-3/4 inch length, (2) 1-1/2 inch inside diameter x 2-3/8 inch length. For 815, 966. (Part No: 178071) ... $24.60

Radiator, Premium Used -

For International tractor models M, Super M, Super MTA, Super W6, W6
Replaces International OEM nos 67173DDX, 351798R92, 352629R92, 356050R91, 356511R92, 357158R92, 357339R91, 50970DEX
Our premium used radiators have been cleaned, inspected, and pressure checked

(Part No: 300146) ... $347.01

Radiator\Fuel Tank Hold Down Spring - This spring is used for the Radiator and for the Fuel Tank. Total 5 used per tractor, 2 for the radiator and 3 for the fuel tank. Spring measures 3/4 of an inch diameter and 1.15 inches long. For tractor models H, HV, O4, O6, SUPER H, ( As radiator hold down spring only - 2 used: SUPER M, SUPER MTA, W4, W6, WD6, 400, 424, 450, 2424. (Part No: 126686) ... $7.50

Thermostat - This 160 degree Long Neck Thermostat. Fits the following tractor models: H, HV, M, MD, MDV, MTA, MV, O4, O6, Super H, Super HV, Super M, Super MD, Super W6, W4, W6, W9, 300, 350 Gas, 400, 450, 560 Diesel, 656 Diesel, 660 Diesel, and 706 Diesel. It does not come with a gasket. Replaces part numbers 313942R91, 313942R92, 315838R91, 317668R91, 37634DA, 261514R92. (Part No: 110010) ... $40.00

Tower Hose Clamp 1.815 inch to 2.000 inch -

For International / Farmall tractor models H, I4, I6, M (Early), O4, O6, OS6, Super H, Super M, W4, W6, 300, 350
Compatible with John Deere tractor models 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4020, 4025, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8020, 8430, 8630
Replaces OEM number 55624D

(Part No: 130438) ... $9.20

Water Block Drain Plug, Winged - Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub Lo-Boy. (Part No: 178066) ... $13.00

Water Jacket Cover - For tractor models 400, 450, M, Super M, Super MTA. Gasket available separately as 46128DB. (Part No: 110532) ... $41.80

Water Pump Gasket -

For International / Farmall tractor models M, Super M, Super MTA, W6, 400, 450
Replaces International OEM number 45981DA

(Part No: 154670) ... $2.80

No
Picture

Water Pump Pulley Flange, Used -

For International tractor models B, F30, I6, M, O6, Super M, Super W6, W6, W30, W40, 400, 450
Replaces International OEM number 2370DBX, 2370D
OD: 6-1/4"
ID: 3-29/32"
1/2 Adjustable Nut
Set Screw Thread 5/16-18 NC
For a new version of this item use Item #: 108977
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435430) ... $17.51

Water Pump, Assembly - For tractor models 400, 450, M, MD, Super M, Super MTA. Crawlers: T6, TD6. (Part No: 107092) ... $195.00

No
Picture

Water Pump, Remanufactured, 353729R92, 6345D -

For International / Farmall tractor models M, O6, Super M, Super MTA, W6, 400, 450
Replaces International OEM number 353729R92, 353729R92-R, SW01971
Replaces International Casting number 6345D, 353729
Includes mounting gasket
Additional Handling and Oversize Fees Apply To This Item

(Part No: 204182) ... $270.01

Water Temp Gauge - 19 Lead - with IH Logo For H, Super H, M, Super M, Super MTA, W-4, Super W4, W-6, Super W6, W-9 (Part No: 111254) ... $37.80

Category: Decals and Emblems

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Decal Set - For model Super M. DRESS UP THAT OLD WORKING TRACTOR with a new set of 12 self adhesive decals. These are printed on Mylar, not die cut. (Part No: 101067) ... $32.10

Hood Emblem - For Super H, Super HV, Super M, Super MTA, Super W4, Super W6, W6TA, Super W9, WD9. Hood Emblem "IH" is 2-1/2 inch x 2-3/4 inch. (Part No: 103914) ... $15.00

IH Decal, 1 inch, Vinyl -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH logo vinyl cut decal 1"
no background

(Part No: 101023) ... $1.80

IH Decal, 1-5\8 inch, Vinyl -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH logo vinyl cut decal 1 5/8"
no background

(Part No: 101024) ... $2.70

IH Decal, 3 inch x 3-1\2 inch, Vinyl -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH logo vinyl cut decal 3" x 3-1/2"
No background

(Part No: 101025) ... $10.50

IH Decal, 4-1\2 inch x 5 inch -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH logo 4-1/2" x 5"
Mylar decal

(Part No: 101095) ... $5.30

International Decal Serial Number Tag - Later Style -

For International / Farmall tractor models C (1950 and up), Cub, H, M, Super A (1950 and up), Super A, Super C, Super H, Super M, Super MTA
Model number IHS289B

(Part No: 168699) ... $27.60

International Decal Set, 1 1\4 inch IH Logo, Vinyl -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH logo vinyl cut decal 1-1/4"

(Part No: 101018) ... $2.70

International Decal Set, 1 3\4 inchx 1 5\8 inch IH Logo, Vinyl -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH logo vinyl cut decal 1-3/4"

(Part No: 101019) ... $3.50

No
Picture

International Decal Set, 6 1\2 inchx 7 inch Shaded IH Logo, Vinyl -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH Logo 7", Vinyl Cut, Shaded Outline

(Part No: 101020) ... $15.70

No
Picture

International Decal Set, 7 1\4 inchx 8 inch Shaded IH Logo, Vinyl -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH logo vinyl cut decal 8"

(Part No: 101021) ... $20.90

International Decal Set, Super M, Vinyl -

For International / Farmall tractor model Super M
Mylar decal set use Item #: 101067

(Part No: 100938) ... $91.00

International Decal Set, Super MD, Mylar -

For International / Farmall tractor model Super M (D (1952-54)
Vinyl decal set use Item #: 100939

(Part No: 101068) ... $47.00

International Decal Set, Super MD, Vinyl -

For International / Farmall tractor model Super M
Mylar decal set use Item #: 101068

(Part No: 100939) ... $140.00

International Decal Set, Super MD-TA, Vinyl -

For International / Farmall tractor model Super M

(Part No: 100942) ... $126.00

International Decal Set, Super MTA Diesel, Vinyl -

For International / Farmall tractor model Super M

(Part No: 100941) ... $126.00

International Decal Set, Super MTA, Vinyl -

For International / Farmall tractor model Super M
Mylar decal set use Item #: 101069

(Part No: 100940) ... $119.00

International Decal Set,10 inch IH Logo, Vinyl -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH logo vinyl cut decal 10"

(Part No: 101022) ... $27.90

International Decal, 17 inch, Mylar -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
17" long
Black
Mylar decal

(Part No: 101105) ... $5.30

International Decal, 8-1\2 inch, Mylar -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
8 1/2" long
Black
Mylar decal

(Part No: 101104) ... $3.50

International Harvester Decal, 2 inch x 2-1\2 inch, Mylar -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH logo 2" x 2-1/2"
No background
Mylar decal

(Part No: 101097) ... $3.50

International Harvester Decal, 2 inch x 2-1\4 inch, Mylar -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH logo 2" x 2-1/4"
Mylar decal

(Part No: 101092) ... $3.50

International Harvester Decal, 2-3\4 inch x 3 inch -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560

(Part No: 101093) ... $3.50

International Harvester Decal, 5 inch Mylar -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH Logo decal
5" diameter
Shaded outline
Mylar decal

(Part No: 101099) ... $5.30

International Harvester Decal, 5-1\2 inch x 6 inch, Mylar -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH logo 5-1/2" x 6"
Mylar decal

(Part No: 101096) ... $5.30

International Harvester Decal, 5-1\2 inch x 6 inch, Mylar -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH logo 5-1/2" x 6"
No background
Mylar decal

(Part No: 101098) ... $5.30

International Harvester Decal, 6 inch Mylar -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH Logo decal
6" diameter
Shaded outline
Mylar decal

(Part No: 101100) ... $7.00

International Harvester Decal, 7-1\2 inch, Mylar -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH Logo decal
7 1/2" diameter
Shaded outline
Mylar decal

(Part No: 101101) ... $8.80

International Harvester Decal, 9 inch, Mylar -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
IH Logo decal
9" diameter
Shaded outline
Mylar decal

(Part No: 101102) ... $10.50

International Hood Decal, 23-1\2 inch, Vinyl -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
Size: 23-1/2"
Black lettering

(Part No: 101031) ... $14.00

McCormick International Decal, 10 inch Vinyl -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
10" long
Black and white
Vinyl decal

(Part No: 101103) ... $8.80

McCormick International Decal, Hood, White\Black, 7-1\4 inch, Vinyl -

For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560
7-1/4" black and white
Vinyl decal

(Part No: 101026) ... $7.00

Toolbox Decal - For tractor models H, M, MD, Super H, Super M, Super MD, Super MTA. (Part No: 183184) ... $7.20

Category: Drive Train

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Axle Seal, Rear - For 2-3/4 inch axles (inside diameter 2-3/4 inch, outside diameter 3-5/8 inch). For tractor models 200, 230, 240, 2504, 2544, 2656, 340, 400, 404, 450, 460, 504, 544, 560, 656, 666, Hydro 70, Hydro 86, M, Super M, Super MD, Super MV, Super MDV, Super MTAD, Super MTA. All with 2-3/4 inch axle diameter. Replaces 117567H1, 154935H1, 165651H1, 167175H1, 333750R91, 358780R91, 358819R91, 360457R91, 369319R91, 377788R1, 377788R91, 381042R91, 48776D, 57085D, A27130, AA510R, AA520R, O7041AB (Part No: 172589) ... $17.00

Bearing - Tractors, Implements. Ball bearing, has many applications including water pump bearing on tractors: M, MD, Super M, Super MD, W6, WD6, 06, ODS6, Super W6, Super WD6, W9, WD9, Super WD9, 400, W400, 450, W450. For 400, 450, 5088, 5288, 5488, M, MD, O6, ODS6, Super M, Super MD, Super W6, Super WD6, Super WD9, W400, W450, W6, W9, WD6, WD9. Replaces ST205A (Part No: 178129) ... $6.60

Bull Pinion Shaft Bearing Retainer Oil Seal - This�bull pinion shaft bearing retainer oil seal has a 2.25 inch Inside Diameter, a 3.256 inch Outside Diameter and is .375 inch wide. There are two used per tractor. It Fits:�400, 450, 560, 660, MTA, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MVTA, Super W6, Super WD6, W400, W450, W6TA, M (SN: 294226 and up), MV (SN: 294226 and up), MD, MDV. Two needed per tractor. Replaces: 1699480C91, 200721H1, 3139744R1, 336626R91, 357037R91, 358896R91 (Part No: 163584) ... $19.80

Gear Shift Boot - Some of the Farmall / International tractors were not factory equipped with a gear shift boot, and it was sold as an extra. This boot is used on models: H, M, 560, I4, I6, ID6, Super MVTA, 2606, HV, MD, T340, T5, MDV, MV, TD6, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MTA, Super MV, Super W4, Super W6, Super WD6, W4, W6, WD6, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 606, 660, B275, 354, 384. It measures 4-3/4 inches tall, 11/16 inch top hole inside diameter and 2-3/4 inches bottom hole. (Part No: 182890) ... $24.80

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Part No: 109514) ... $5.80

Oil Seal - Fits: [A, A-I, A1, AV, AV-1, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 2404, 404 (Top Transmission Shaft Front Seal)], [B-250, B-275, B-276, B-414, 2300, 2300A, 2424, 2444, 3414, 3444, 354, 364, 384, 424, 434, 444 (Bull Pinion Shaft Bearing Retainer Seal)], [Cub, Cub Lo-Boy, 154, 184, 185 (Final Drive Upper Pinion Shaft Seal)], [M, MD, MDV, MV (Transmission Counter Shaft Front Seal)], MTA (Front Wheel Seal; with single front 900 x 10 wheel), [O4, OS4 (PTO Output Shaft Seal; serial number 2159 to 9300)], [Super M, Super MD, Super MDV, Super MV (Transmission Counter Shaft Front Seal; up to serial number F52627 and up to serial number L51241)], W4 (PTO Output Shaft Seal; serial number 786 to 9300). Replaces: 21969D, 264694R91, 287440R91, 3043788R91, 3043788R92, 358765R91, 358784R91, 358808R91, 358823R91, 381907R91, 42177D, 43278D, 50839D, 530969R91, 703907R91, 703908R92, A29424. (Part No: 178204) ... $6.00

Rear Saddle - When using this rear saddle a wide front can be installed. For tractor models M, MD, MTA, Super M, 450, Farmall 400. (Part No: 110604) ... $209.00

Reverse Idler Gear Bushing - This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a reverse idler gear bushing: 400, 450, 560, 660, B-450, BM, BMD, M, MD, MDV, MTA, MV, O6, ODS6, SBM, SBMD, Super M, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W6, Super WD6, W400, W450, W6, W6TA, WD6, WD6TA; Replaces: 48841D (Part No: 109669) ... $13.70

Shift Lever Repair Pin Kit -

For International / Farmall tractor models B250, B275, B276, B414, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, W4, W6, W400, W450, WD6, WD9, 300, 330, 340, 350, 354, 364, 384, 400, 424, 434, 444, 450, 460, 504, 560, 606, 660, 2300
Replaces International OEM number 256918R1, 172529, 256919R1, 259918R11, 310662R11, 310664R11, 34878D, 357003R1, 40465DA, 40466DA, 705650R1

(Part No: 167881) ... $25.00

Category: Electrical System

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

12 Volt Conversion Kit - For M, Super M. Kit includes alternator with built-in regulator, Pulley, 12 volt resistor, wiring harness, brackets and instructions. Will not work if you have a magneto. THIS KIT USES A LARGER ALTERNATOR THAN THE IHCALTH KIT. IT WILL NOT FIT UNDER HOOD WITHOUT CUTTING HOOD. (Part No: 107099) ... $144.00

No
Picture

Alternator - Delco Style (12453) -

For International / Farmall tractor models M, Super M (both less tachometer)
Replaces Delco Remy manufacturer number 10459509
Replaces manufacturer number ADR0163, 400-12453, 7127-SE
Voltage: 12
Regulator: Internal
Amperage: 63 Self Exciting
Clock Position: 12
1-Wire System

(Part No: 164230) ... $123.00

No
Picture

Alternator Mounting Bracket -

For International / Farmall tractor models M, Super M
Steel
9.7mm Thick
(2) 10.7mm Unthreaded Holes
(1) 9mm Unthreaded Hole
(2) 10.2mm Unthreaded Holes

(Part No: 164226) ... $15.50

Battery Box - Restoration -

For International / Farmall tractor models Super H, Super M, Super MTA, 300, 350, 400, 450
Replaces International OEM number 359500R91, 358693R91, 362059R92
Does not include mounting legs
Fits under the seat
Comes primered (color may vary). Prior to painting check fitment

(Part No: 151845) ... $117.00

Battery Box Grommet -

For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, H, I4, I6, I9, M, MD, O4, O6, Super H, Super M, Super MTA, Super W4, W4, W6, W9, 300, 350, 400, 450
Replaces International OEM number 248-1146, 24179D, 52118D

(Part No: 126446) ... $2.90

Battery Box Support Lock Bolt -

For International / Farmall tractor models M, MD, Super M
Replaces International OEM number 51712D
Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed

(Part No: 126451) ... $5.60

Battery Box With Lid, Used -

For International tractor models M (s/n 28174-earlier), MD (s/n 28174-earlier), MDV, Super M, Super MTA, W6
Replaces International OEM number 51707D
Replaces International Casting nos 51713DB
For a new version of this item use Item #: 112489
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 457136) ... $60.00

Battery Box and Lid -

For International / Farmall tractor models M (s/n 28174-earlier), MD (s/n 28174-earlier), Super M (s/n 28174-earlier), Super M, W6
Replaces International OEM number 51707D, 51713DB
Restoration Quality
Inside Dimensions: 7-3/16" W x 9-1/8" T x 11-3/4" L
Mounts under the gas tank
Lid includes metal retainers and rubber bushings installed
Comes primered (color may vary). Prior to painting check fitment

(Part No: 112489) ... $108.00

Battery Box, Used -

For International tractor models Super H, Super M, Super MTA, 300, 350, 400, 450
Replaces International OEM number 358693R91
For a new version of this item use Item #: 151845
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 430719) ... $56.01

No
Picture

Battery Box, Used -

For International tractor models Super H, Super M, Super MTA, 300, 350, 400, 450
Replaces International OEM number 358275R11
For a new version of this item use Item #: 104014
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435327) ... $100.01

No
Picture

Battery Push\Pull Switch, Used -

For International tractor models A, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA, 100, 130, 140, 200, 230, 240
Compatible with International Harvester(s) 55, 350, 414, 420, 550, 650, 720, 781, 830, 881
Compatible with International Hay Cutting(s) 201, 210, 225, 230, 275, 375
Replaces International OEM number 62801DC
2 Screw Terminal Contacts
6 Volt, 2 Position, for battery system
For a new version of this item use Item #: 111177
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435530) ... $4.51

Coil, Original, 12 Volt - OEM style coil. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. This is an International Harvester OEM style 12 volt distributor coil. This distributor coil has a 2.8 ohm rating between the two primary winding terminals. Requires an external resistor. (Part No: 154651) ... $65.00

Coil, Original, 6 Volt - OEM style coil. Measures overall length of 5 3/8 inches, Diameter at widest point of center ridge is 2 1/4 inches. This distributor coil has a 1.4 ohm rating between the two primary winding terminals. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 154650) ... $66.00

Distributor - Original IHC design comes with a 32 tooth drive gear. For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. R6332 (Part No: 124839) ... $113.00

Distributor - New and complete distributor comes with a 32 tooth gear, and is for tractor models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA and other IH equipment with International Distributors. Replaces: 107296C91, 107299C91, 107302C91, 107304C91, 353890R91, Distributor Housing Casting Number: 353898R11, 354900R91, 357935R91, 362473R91, 362722R91, 364653R91, 364696R92, 366928R91, 372712R91, 380622R91. Uses IH points (included). (Part No: 124839) ... $113.00

Distributor Breaker Plate - Used on International Distributors, this plate is where points are secured. Points not included. Four Cylinder Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Replaces 352277R11 (Part No: 190142) ... $24.50

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. Replaces 811735 Delco and 1750411M1. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Part No: 104554) ... $9.20

Distributor Cap - 2-3/16 inches high, fits 4 cylinder. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Part No: 105571) ... $9.40

Distributor Cap Spring Clip - Fits listed IH models when equipped with IH brand distributor 353898R11. Replaces: 107384C1, 353894R1 (Part No: 178117) ... $18.40

Distributor Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Part No: 111108) ... $6.20

Distributor Drive Housing - This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing, part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Part No: 178938) ... $107.00

Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Part No: 110682) ... $18.00

Distributor Drive Shaft, Used -

For International tractor models A, B, C, Cub, Cub Lo-Boy, Cub 154, Cub 184, Cub 185, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 3444
Compatible with International Construction and industrial models T6, TD6, TD9, TD14, TD18
Replaces International OEM number 353934R11
Fits listed models using IH distributor 353898R11
16 Teeth
For a new version of this item use Item #: 110682
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435503) ... $10.26

Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Part No: 107074) ... $16.10

Distributor Gear - This Distributor Gear has 32 teeth. It is used on IH Distributor 353898R11. Replaces original part numbers 353902R1, 531461R91 (Part No: 111179) ... $30.00

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Part No: 182464) ... $9.60

Distributor Insulating Terminal Washer - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a Distributor Insulating Terminal Washer. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Part No: 118474) ... $6.40

Distributor Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: 110266) ... $4.00

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits A, A-I, A1, AV, AV-1, B, BN, C, H, HV, I4, I6, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, T6, U2, U2A, U4, U6, W4, W6 all with Delco vertical conversion distributor 1111411. Replaces: washer: 811913, shim washer: 810074, 810078, bushing: 1909003, 1952334 (Part No: 178103) ... $29.30

Distributor Shaft Bushing and Shim Kit - International Distributor Shaft Bushing and Shim Kit. Fits tractor models A, A1, AV, AV1, B, BN, C, Cub, Cub Lo-Boy, H, HV, M, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 300, 330, 340, 3444, 350, 3514, 400, 404, 424, 444, 450, 504, 600, 650. Replaces: 252739R1, 352298R1, 353899R1, 353921R1, 373577R91, 86637641. This is a 5-piece kit. The length is 2.006 inches. (Part No: 178766) ... $44.00

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Round Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.345 inch diameter round hole. If not sure, measure before ordering. Used on Some of the following, using Delco 1111411 vertical distributor with round insulating terminal: I4, I6, T6, A, AV, B, BN, C, H, HV, M, MV, O4, O6, Super C, Super H, Super M, Super MV, W4, W6 (Part No: 111459) ... $15.00

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Farmall / IH with Delco 1112461, 1112601, 1112655, 1111411, 1112607, 1112609. This if for vertical Delco Distributors. Not for IH Distributors or Magnetos. Replaces: 120622, 817363, 1914142, 1914144, 1916805, 1916806 (Part No: 111468) ... $14.50

Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Part No: 118472) ... $7.50

Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Part No: 118473) ... $7.20

Distributor with Electronic Ignition - New and complete distributor comes with a 32 tooth gear, and is FOR USE WITH 6 VOLT POSITIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. (Part No: 113311) ... $655.78

Distributor with Electronic Ignition - 12V - New and complete distributor comes with a 32 tooth gear, and is FOR USE WITH 12 VOLT NEGATIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Note: This distributor has a maximum advance of 21 degrees. Some applications require an advance up to 40 degrees. Verify with your service manual this distributor will work for your application. (Part No: 113361) ... $635.88

Distributor with base and tach drive, Remanufactured -

For International / Farmall tractor models A, B, C, Cub, H, M, Super A, Super C, Super H, Super M, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 2504
With tachometer drive and with base
Includes new distributor cap, points, condenser, 6V coil, and all other parts needed for a thorough rebuilt unit

(Part No: 203589) ... $714.01

Distributor with base and tach drive, Used -

For International tractor models A, B, C, Cub, H, M, Super A, Super C, Super H, Super M, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 2504
With tachometer drive and with base
Includes new distributor cap, points, condenser.
Does Not Include Coil
For a Remanufactured version of this part use Item #: 203589
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 403589) ... $291.01

Distributor with base less tach drive, Remanufactured -

For International / Farmall tractor models A, B, C, Cub, H, HV, I4, I6, M, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2404, 2424, 2444, 2504, 3444, 3514
Compatible with International Combine (s) 105, 203
Compatible with International Construction and industrial models T6, T340, 500
Without tachometer drive and with base
Includes new distributor cap, points, condenser, 6V Coil, and all other parts needed for a thorough rebuilt unit

(Part No: 203588) ... $434.01

No
Picture

Distributor with base less tach drive, Used -

For International tractor models A, B, C, Cub, H, HV, I4, I6, M, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2404, 2424, 2444, 2504, 3444, 3514
Compatible with International Combine(s) 105, 203
Compatible with International Construction and industrial models T6, T340, 500
For a Remanufactured version of this part use Item #: 203588
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 430308) ... $204.01

Distributor, Rebuilt - Complete remanufactured distributor for Farmall Cub, A, B, C, Super A, H, M, Super H, Super M, W6, W9, Super W6, 100, 130, 200, 240, 300, 400, 404, 450, 504 tractors with IH distributor with 353898R1 housing casting number. IH original part numbers 353890R91, 107304C91. A refundable $50.00 core charge will be added to your order. (Part No: 203587) ... $426.01

Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Part No: 105084) ... $161.00

Electronic Ignition Conversion Kit - Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve Ground System only. (FOR NEGATIVE GROUND order part number 1442). Use with distributor number 357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. (Part No: 105085) ... $174.00

Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Part No: 105083) ... $159.00

Electronic Ignition Conversion Kit - 12v Negative Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. or 1111411. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt NEGATIVE ground system only. Distributors with clip type cap. (Part No: 105071) ... $140.00

Electronic Ignition Conversion Kit - 12v Positive Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368 or 1111411. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt POSITIVE ground system only. (Part No: 108148) ... $176.00

Electronic Ignition Conversion Kit, 6v Positive Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with Delco distributor part no. 1885368 with clip type cap. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 6 volt positive ground system only. (Part No: 105072) ... $160.00

F4 Magneto Tune-Up Kit -

For International / Farmall tractor models A, B, C, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 400, 450
Contains points and condenser to service F4 magneto

(Part No: 112535) ... $29.26

Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Part No: 112273) ... $10.40

No
Picture

Generator - Delco Style (9718), Remanufactured, Delco Remy, 1100501 -

For International / Farmall tractor models A, B, C, Cub, H, HV, I4, I6, I9, M, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9
Compatible with International Combine (s) 101, 140, 151
Compatible with International Construction and industrial models T6
Compatible with International Baler (s) 37, 47, 57
Replaces Delco Remy manufacturer number 1100501
Replaces manufacturer number 9718, 340-21, 92-01-3050
Delco Style
Voltage: 6
Rotation: Clockwise
Amperage: 25
Regulator: External

(Part No: 203178) ... $408.38

Generator Belt - Generator belt, fits engines : C248, C264, and C281. For tractor models: M, 6, Super M, Super W6, 400, W400, 450, W450. For 400, 450, 6, M, Super M, Super W6, W400, W450 (Part No: 111156) ... $11.70

Generator Pulley - This 2 piece adjustable pulley is used on gas or LP; with generator #'s 1101355, 1101423, 1100501, 1100997. The pulley measures 4.129 inch Diameter. Made with ductile iron. Includes set screw and lock nut. Used on: H, M, I4, I6, I9, HV, MV, W6TA, W9, O4, WR9, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, W4, W6, WR9S, 300 (Farmall) up to SN 11002, 300 (Industrial) up to SN 2689, 400 (Farmall) up to SN 13458, 600, 650. Replaces 6745D, 6745DA, 6746D, 6746DA (Part No: 125677) ... $49.30

Generator to Alternator Bracket Set -

For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450
For converting from generator to alternator

(Part No: 113517) ... $61.00

No
Picture

Governor Throttle Housing, Used -

For International tractor models M, Super M, W6, 400, 450
Replaces International OEM number 6736DBX, 6736DAX
For a new version of this item use Item #: 105377
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435363) ... $68.01

No
Picture

Governor Throttle Shaft, Used -

For International tractor models M (s/n FBKM6428-later), MD (s/n FBKM6428-later), MTA, Super M, Super MTA, W6, 400, 450
Replaces International OEM number 49788DXA
For a new version of this item use Item #: 105379
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435364) ... $18.51

H4 Magneto Pinion Driven Gear - This gear has 24 teeth and measures: 0.380 inch inside diameter, 0.759 inch outside diameter, 1.075 inch gear outside diameter, 0.952 inch overall height. It is used on H4 Magnetos. (Part No: 183878) ... $24.40

Ignition Switch - 2 terminal. For the following Models using a distributor: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, (140 6 volt), 200, 230. NOT like original. (Part No: 111177) ... $10.40

Ignition Switch - This Ignition Switch is for Distributor Ignition Systems. This is a 2 terminal switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230 (Part No: 117579) ... $42.10

Ignition Switch - This Ignition Switch is for Magneto Ignition systems. This switch has only 1 terminal. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub. Replaces 54207DB (Part No: 117580) ... $51.00

Ignition Tune-up Kit, Basic, Delco Clip Held Cap - Ignition kit For Delco ONLY distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414, I4, I6, MTA, MV, O4, O6, T6, U2, W4, W6. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583. Not for IH Distributors. (Part No: 103151) ... $10.50

Lighting Switch Dimmer Resistor -

For International / Farmall tractor models A, B, Cub, H, HV, M, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, TD6, TD9, W4, W6, W9, 100, 130, 200, 230, 300, 350, 400, 450
Replaces International OEM number 47889D
Will Not Fit 154, 184, 185

(Part No: 126566) ... $16.20

Magneto - This is a New Wico Magneto used on Farmall / IH Models: A, AV, B, BN, C, H, HV, I9, M, MTA, MTAV, MV, O4, O6, OS6, Super A, Super C, Super H, Super M, W4, W6, W6TA, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650. It is also used on some industrials and power units. (Part No: 180178) ... $558.00

Magneto Coil Cover - For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 105661) ... $30.01

Magneto Distributor Cap, H4 Magneto - For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 105662) ... $17.60

Magneto Gasket Set - This magneto gasket set is for H4 Magnetos. It contains; Coil cover gasket 47453D, Distributor body gasket 47408D, Distributor gear cover gasket 49419D, Condenser hole cover gasket 359966R1 (48472DA), Magneto mounting gasket 55780DE (55780DD). Replaces: 359966R1, 47408D, 47453D, 48472DA, 49419D, 55780DD, 55780DE, E4226. For tractor models A, AV, B, BN, C, H, HV, I4, I6, I9, M, MTA, MV, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, T4, T5, T6, T9, U2, U2A, U4, U6, U9, W4, W6, W6TA, W9, WR9, WR9S, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650, 400, 450 (Part No: 111272) ... $10.00

Magneto Rotor H4 Magneto - This Rotor is used on tractors with H4 magneto. Replaces 47425DX, 47425DY, 47428DA (Part No: 111106) ... $11.80

Magneto Tune-up Kit For H4 - Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Part No: 105297) ... $22.20

Magneto or Distributor Drive Shaft - Verify part number before ordering. For tractor models (300, 350, 400, 450 all not used with hydra touch system), (H, HV serial number 268224 and up), (M, MD, MDV, MV all serial number 148867 and up), Super H, Super HV, (Super M, Super MTA not used with hydra lift, attached with engine driven pump). (Part No: 173506) ... $114.00

Push\Pull Switch Knob -

For International / Farmall tractor models A, B, C, Cub, H, HV, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, W4, W6, W9
Replaces International OEM number 8732D
Knob only replacement for push/pull switches

(Part No: 126614) ... $8.10

Rotor - Used with Delco distributors 1111411 with a clip held cap. For tractor models: A, I4, AV, Super A, Super AV, Super AV1, B, BN, C, Super C, H, HV, Super H, Super HV, M, Super M, MTA, Super MTA, MV, Super MV, O4, O6, OS4, OS6, T6, W4, W6, 354 (distributors with a tach drive). Replaces 3069778R1. (Part No: 110177) ... $3.80

Spark Plug - Spark Plug 18MM Thread Diameter for: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. Replaces OEM number 360942R1. Also replaces Autolite AL386, AL388, AL3116 and Champion D16, 516, D10, D14, D16J, D21, D89D, K13, K15J, M14, RD14, RD16, UD16 plugs (Part No: 111742) ... $3.20

Spark Plug Wire Set, Custom - IH or Delco Distributors and Magnetos. For the following models with 90 degree angle boots: A, I4, AV, Super A, Super A1, Super AV, SuperAV1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, H, HV, Super H, Super HV, M, MD, Super M, Super MD, Super MDV, MDV, Super MDVTA, MTA, Super MTA, MV, Super MV, Super MVTA, O4, O6, ODS6, OS4, OS6, T340, T5, T6, TD6, SuperW4, W4, Super W6, Super W6TA, W6, W6TA, Super WD6, WD6, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404, 424, 444, 450, W450, 504. Replaces the following OEMS: 352947R91, 352951R91, 352954R91, 352956R91, 356687R92, 356689R92, 356691R91, 356694R92, 356695R92, 356697R93, 362439R91, 362789R91, 407487R1, 45327DA, 46277DA, 50075D, 52794D, 65352D, 65357D, 65358D, and 65359D. (Part No: 120100) ... $17.50

Starter - Delco DD (4406), Used -

For International tractor models H (after s/n 19234 1939-53), I4, I6, M (after s/n 28175 1939-52), O4, O6, Super H, Super M, Super MTA
Compatible with International Engine(s) C152 (gas), C248 (gas), D264 (diesel)
Replaces International OEM number 357907R91
Replaces Delco Remy Mfg nos 1108012
Style: DD
Voltage: 6
Rotation: Counter Clockwise
Teeth: 10
Mounting Holes: 3
For a new version of this item use Item #: 203213
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 403213) ... $107.01

Starter Armature - Used with Delco Starter # 736C, 737B, 737G, 1107067, 1107074, 1107093, 1107169, 1107174, 1107404, 1107407, 1107408, 1107427, 1107430, 1107435, 1107444, 1107448, 1107462, 1107487, 1107490, 1107926, 1107999, 1108012, 1108016, 1108038, 1108041, 1108060, 1108080, 1108092, 1108097, 1108103, 1108112, 1108142, 1108158, 1108173, 1108174. Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Part No: 182636) ... $93.58

No
Picture

Starter Assembly - For 6 volt systems in tractors:H, M, Super H, Super M: 4 series. Can replace original Delco 1107448 and TISCO starter 5218-EX. (Part No: 109769) ... $133.00

Starter Drive - Starter drive, services Delco starter: 1108913. Tractors: M, Super M. 12 teeth. For M, Super M (Part No: 111670) ... $88.67

Starter Drive - This Starter drive fits gas engines for the following models: A, B, C, H, M, Super A, Super C, Super H, W4, W6, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450 Replaces OEM# 1107021, 1107412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 1107408, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. (Part No: 107059) ... $34.00

Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Part No: 179382) ... $75.01

Starter Drive Parts - Complete unit available as 356037R91 (Part No: 178541) ... $130.00

Starter Drive Spring - Spring, main drive, for starter 77695H. Tractors:Super A, C, Super C, H, M, Super M, 4, W4, 6, W6, Super W6, 100, 130, 140, 300, 330, 340, 350. For 100, 130, 140, 300, 330, 340, 350, 4, 6, C, M, Super C, Super M, Super A, W4, W6 (Part No: 111718) ... $31.80

Starter Drive, Improved Style - This improved style starter drive is a positive ratchet style. For A, B, C, H, M, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450, Super A, Super C, W4, W6 all using the following starters 1107021, 2207412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 11074808, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Part No: 112575) ... $37.30

Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Part No: 189672) ... $62.00

Starter Switch Actuator - This new foot starter switch actuator lever and bracket fits; H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV and Super MV where a foot activated starter switch mounts to the steering post. Replaces: Lever: 351922R11, Bracket: 351924R1 (Part No: 185010) ... $57.14

Starter Switch Pull Rod - This Starter Switch Pull Rod is 24-5/8 inches long and has a 1/4 inch outside diameter. It fits [Super M, Super MV (serial number F28175 to F52627 and serial number L504802 to L512541; gas, LP)]. Replaces number 358266R1. (Part No: 179392) ... $40.70

Starter Switch, Manual - For H, M, Super M, MD, O4, OS4, W4, O6, OS6, ODS6, W6, WD6. Replaces delco 405C, IH64931H, 356913R1, 1996487. Base mount with 7/8 inch hole. (Part No: 105684) ... $9.50

Starter Switch, Manual - Starter Switch, manual, saddle mount. For A, B, C, Cub, Cub Lo-Boy, Super A and AV, Super C, H, HV, Super H and HV, Super M and MV, Super W6 and WD6, 100, 130, 140, 200, 230. Saddle Mount, 2 mounting holes, 190 inside diameter. With 1-3/8 inch centers. Replaces Delco 1918405, 1932131, and OEM IH number 593292C1. (Part No: 105669) ... $9.50

Starter, 6 Volt, 2 Bolt Mount - 2-bolt mounted starter for C163 gas engine on H (to serial number 19233), HV, for 248 gas on M (to serial number 28174), 152 Gas on OS4 (1940 to 1951), C248 Gas on O-6 (1940 to 1951), C264 gas on O-9 (1940 to 1951), C163 Gas on Super W-4 (1952 to 1954), C264 Gas on Super W-6/6TA (1946 to 1951), C335 Gas on Super W-9 (1946 to 1951), C163 Gas on I4 (1940 to 1951). Replaces 1107427, 997870R91, 1107448, 997870R91, 104219A2R. Can be used on a 12 volt system and recommend installing heavy duty starter drive part number 565549-NEW. (Part No: 109769) ... $133.00

Starter, 6 Volt, 3 Bolt Mount - 3-Bolt mounted for Super H, HV, O4, OS4, I4, W4, Super M, MTA, MV, O6, OS6, I6, W6, W6TA. (Part No: 127035) ... $234.00

Starter, 6 Volt, 3 Bolt Mount, Rebuilt - 3-Bolt mounted for Super H, HV, O4, OS4, I4, W4, Super M, MTA, MV, O6, OS6, I6, W6, W6TA. REBUILT Starter. 6 Volt. Replaces Delco 1108012. Replaces 357907R91, 4406, 140-050, 91-01-3979 Refundable $80 core charge. (Part No: 203213) ... $353.24

Starter, 6V - Delco type, 6V, Rotation: CCW, Teeth 10, IH TRACTORS: H (s/n 19234-later), I4, I6, M (s/n 28175-later), O4, O6, OS4, OS6, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6 Replaces Delco 1108012. Replaces International 357907R91 (Part No: 127035) ... $234.00

Starter, Used -

For International tractor models I6, I9, M, MD, MTA, O6, OS6, Super M, Super W6, Super W9
Replaces International OEM number 1108913, 4646, 74646
12-Volt Delco Remy
12 Tooth
CCW Rotation
For a Remanufactured version of this part use Item #: 205608
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 405608) ... $291.01

Starter, Used -

For International tractor models H (s/n 19233-earlier), HV, I4, M (s/n 28174-earlier), O4, O6, O9, OS4, OS6, Super H, Super M, Super MTA, Super W6, Super W9, W4
Replaces International OEM number 104219A2, 1107448, 4132, 63608D, 997870R91, 1107427, TS-1004
Engine(s): C152, C163, C248, C264, C335
Voltage: 6
Rotation: CCW
Teeth: 10
Mount: 2 ear
For a new version of this item use Item #: 203150
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 403150) ... $80.01

Starter-Drive - 12 Teeth, REPLACES : 1883648, 356037R91 NOTE : Services Delco Starter 1108913, Fits Models M, and Super M. (Part No: 111670) ... $88.67

Starting Switch Lever - Starting Switch Lever - Lever, pull rod starting switch. For 100, 130, 140, 200, 230, C, Cub, Cub Lo-Boy, H, HV, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A, WD6. Replaces: 1918322, 1919434 (Part No: 110972) ... $10.00

Terminal Clip - Light terminal plate with screws. For 200, 230, 300, 330, 350, 400, 450, 600, 650, A, B, C, H, HV, M, MD, O4, O6, ODS6, OS4, OS6, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super WD9, Super WDR9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S (Part No: 117534) ... $6.50

Tune-up Kit - This Tune-up Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Autolite Spark Plugs (AL386), Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: 111814) ... $29.40

Tune-up Kit - This Tune-up Kit is for Delco Distributors with clip help cap. 4 Cylinder kit includes Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs), points, condenser, and rotor. For tractor models with clip held Type Delco Distributor Caps. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. Verify correct spark plug replacement. Note, not for British Delco Distributors 7953342. (Part No: 173738) ... $27.30

Tune-up Kit -

For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Cub 154, Cub 185, H, HV, M, MD, Super A, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 560
Thread: 18 mm

(Part No: 181488) ... $39.10

Tune-up Kit, Basic - This basic tune-up kit is for 4 cylinder gas engines with battery ignition from 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Part No: 105572) ... $12.30

Voltage Regulator, 6 Volt, Positive Ground - REPLACES 121578C1, Delco 1118308, 1118780 and 1119575. Fits tractor models: 100, 130, 140, 200, 330, 340, Cub, Cub Lo-Boy, Super A, Super C, H, M, MTA. This external voltage regulator has a flat base for mounting. There are 4 terminals (lights, battery, field and generator). Designed for A type circuits in positive ground systems with 2 brush generators Measures 7 to 9 output amps. (Part No: 105516) ... $30.00

Wiring Harness - Wiring Harness, Headlights. For H, HV, M, MD, MDV, MTA, MV, Super M (Part No: 173035) ... $13.10

No
Picture

Wiring Harness - For tractor models Super M with Regulator on Generator. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3725) ... $272.89

No
Picture

Wiring Harness - 12 Volt - Used when tractor has been converted to 12 volts with our 12 volt conversion kit. For tractor models H, Super H, M, Super M (Part No: 164232) ... $28.70

No
Picture

Wiring Harness - Lighting - WIRE HARNESS - Headlights only for 200, 230, HV, MTA, Super H, Super M. 6 or 12 volt systems. (Part No: 179266) ... $32.91

Wiring Harness Grommet -

For International / Farmall tractor models A, B, C, H, HV, I4, I6, I9, M, MD, O4, O6, OS4, OS6, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9
Replaces International OEM number 52062D
Mounts in amp box
Outer Diameter: 1.810"
Inner Diameter: 1.246"

(Part No: 126808) ... $5.50

Wiring Harness, Main - Main cable with battery ignition for gas tractors: M, MV (serial number FBK229911 and above), Super M, MTA (serial number F501 to F28174 and L-500001 to L-504801). Cloth covered harness is manufactured to restoration standards. (Part No: 172840) ... $33.40

No
Picture

Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models Super M SN# F-28175 to F-52627 and L-504802 to L-512541. (Part No: 173243) ... $65.00

Wiring Harness, Regulator Cable - For tractor models H, HV, M, MV, Super M, Super MTA. (Part No: 162031) ... $17.37

Category: Engine Bearings

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Cam Bearing Set - 3 bearings. For tractor models 400, (450 with C281 engine), M, MTA, MV, O6, OS6, Super M, Super W6, W400, (W450 with C281 engine), W6, W6TA. (Part No: 106662) ... $44.80

Connecting Rod Bearing - .002 - 0.002 Oversize Connecting Rod Bearing. (C248 CID Gas and Distillate 4-cylinder engine). Rod Journal diameter 2.5475 inch. Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. All with 2.548 inch original standard journal. Replace 356989R11 (Part No: 106477) ... $13.60

Connecting Rod Bearing - .010 - 0.010 Oversize Connecting Rod Bearing. (C248 CID Gas and Distillate 4-cylinder engine). Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. All with 2.548 inch original standard journal. Replace 356955R11 (Part No: 106478) ... $18.50

Connecting Rod Bearing - .020 - 0.020 Oversize Connecting Rod Bearing. (C248 CID Gas and Distillate 4-cylinder engine). Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. All with 2.548 inch original standard journal. Replace 356956R11 (Part No: 106479) ... $21.30

Connecting Rod Bearing - .030 - 0.030 Oversize Connecting Rod Bearing. (C248 CID Gas and Distillate 4-cylinder engine). Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. All with 2.548 inch original standard journal. Replace 356987R11 (Part No: 106480) ... $18.80

Connecting Rod Bearing - Standard - Standard Connecting Rod Bearing. (C248 CID Gas and Distillate 4-cylinder engine). Rod Journal diameter 2.548 inch. Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. Replace 356957R11 (Part No: 106476) ... $15.10

Main Bearings - .002 - This 0.002 oversize bearing set is used on the following engines C248 (late), C264, C281. These engines are found in Super M, Super W6, W400 (s/n 31239-later), W450, 400 (s/n 31239-later), 450, T6 (s/n 7610-later). Replaces 377280R91, 356989R11, 356990R11 (Part No: 106580) ... $143.00

Main Bearings - .010 - This 0.010 oversize bearing set is used on the following engines C248 (late), C264, C281. These engines are found in Super M, Super W6, W400 (s/n 31239-later), W450, 400 (s/n 31239-later), 450, T6 (s/n 7610-later). Replaces 376719R91, 376720R11, 376721R11 (Part No: 106581) ... $97.87

Main Bearings - .020 - This 0.020 oversize bearing set is used on the following engines C248 (late), C264, C281. These engines are found in Super M, Super W6, W400 (s/n 31239-later), W450, 400 (s/n 31239-later), 450, T6 (s/n 7610-later). Replaces 376722R91, 376723R11, 376724R11 (Part No: 106582) ... $91.00

Main Bearings - .030 - This 0.030 oversize bearing set is used on the following engines C248 (late), C264, C281. These engines are found in Super M, Super W6, W400 (s/n 31239-later), W450, 400 (s/n 31239-later), 450, T6 (s/n 7610-later). Replaces 372125R91, 356988R11, 356987R11 (Part No: 106583) ... $117.00

Main Bearings - Standard - This Standard bearing set is used on the following engines C248 (late), C264, C281. These engines are found in Super M, Super W6, W400 (s/n 31239-later), W450, 400 (s/n 31239-later), 450, T6 (s/n 7610-later). Replaces 367885R91, 356986R11, 356985R11 (Part No: 106579) ... $79.00

Rod Bearing Set, C248 Gas or Distillate Engine - STD - Available in standard, .010 or .020. Connecting Rod Bearing Kit (C248 CID Gas and Distillate 4-cylinder engine). Rod Journal diameter 2.5475 inch. Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. Specify size of standard, .010 or .020 in "comments box" when ordering. (Part No: 183974) ... $58.00

Rod Bearing, STD - Single - Sold individually. For tractor models 400, (450 with C281 engine), (M, MV serial number 278050 and up), MTA, (O6, OS6 serial number 35464 and up), Super M, Super W6, W400, (W450 with C281 engine), (W6 serial number 35464 and up), W6TA. (Part No: 106476) ... $15.10

Category: Engine Gaskets

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Crank Seal, Front - This front crankshaft oil seal has a 2.625 inch Inside Diameter, a 3.38 inch Outside Diameter and is .475 inch wide. It Fits: I6, I9, ID6, ID9, M, MD, MDV, MV, O6, ODS6, OS6, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, T6, T6-61, T9, TD6, TD6-61, TD9, TD9-91, W400, W450, W6, W9, WR9, WR9S, 400, 450, 600, 650, B-450, BM, BMD, SBMD, Super BM. Replaces: 258511R91, 357972R91, 357977R91, 358511R91, 53872D, 410708 (Part No: 106640) ... $12.90

Crank Seal, Rear, Gas - Rear crankshaft seal for gas engines. Requires 2 per engine. For tractor models 400, 450, M, MTA, MV, O6, OS6, Super M, Super W6, W400, W450, W6, W6TA. All with 248, 264, or 281 CID gas engines. (Part No: 106654) ... $7.40

Gasket Set, Full - Complete Gasket Set with seals (C248 CID Gas and Distillate 4-cylinder engine). Models M and MV, O6, OS6, W6 and (C264 CID Gas 4-cylinder engine. Stepped head high compression pistons.) Models Super M and MTA, Super W6 and W6-TA, 400, W400, 450, W450. (Part No: 106719) ... $165.00

Head Gasket - For tractor models (400, W400 serial number 163807 and below), M, MTA, MV, O6, OS6, Super M, Super W6, W6, W6TA. (Part No: 172660) ... $58.00

No
Picture

Head Gasket -

For International / Farmall tractor models Super M, Super W6, W400 (s/n 31239-later), W450, 400 (s/n 31239-later), 450
Compatible with International Construction and industrial models T6 (61 Series)
Compatible with International Engine (s) C264, C281
Replaces International OEM number 748957DD, 48957DF
Gas and LP 4 cylinder engines
For Head Gasket Set use Item #: 106107

(Part No: 189686) ... $71.00

Head Gasket Set - For C248 and 264 CID distillate 4 cylinder engine in tractors M and MV to serial number 278049, O6, OS6, W6 to serial number 35463. For tractor models 400, 450, M, MV, O6, OS6, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6. (Upper gasket set with head gasket). Replaces VGK7510S. (Part No: 106680) ... $58.00

Manifold Gasket Set - This Manifold Gasket Set is used with 358308R11 manifold. Replaces Manifold Gasket: 46173DC, Carb Gasket: 21632D, 31336D, 530681R2. MS2620 (Part No: 101546) ... $8.70

Oil Pan Gasket - For tractor models 400, 450, M, MV, O6, OS6, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6. (Part No: 106700) ... $12.40

Rear Crankshaft Seal Kit - Fits tractor models I6, M, MTA, MV, O6, OS6, Super M, Super MV, Super W6, Super W6TA, T6, T6-61, U6, W6, 400, 450 (Gas or LP), Wheatland: 400, 450 (Gas or LP); Replaces: Contains two: 57613DA, (subs for 46134D): 46134DA, (sub for 46131DA): 46131DB, Contains two (sub for 46121D): 46121DA, Contains two (sub for 379617R91, 379618R91 and 842578R91): 25093DA (Part No: 178604) ... $40.30

Upper Gasket Set - For tractor models with the C264 and C281 engines 400, 450, W450, M, MTA, MV, O6, OS6, Super M, Super W6, W400, W6, W6TA.HGS248 (Part No: 106680) ... $58.00

Valve Cover Gasket - Used on M, Super M, 400, 450 and other equipment with International Gas Engines C248, C264, C281. Replace original part number 45952DB, 45952DC, 45952DA 68040D, 842578R95. (Part No: 128603) ... $12.20

Water Jacket Gasket - For tractor models 400, 450, M, Super M, Super MTA with C264 gas engine. (Part No: 110533) ... $6.50

Water Jacket Plate, Used -

For International tractor models M, MD, Super M, Super MTA, W6, 400, 450
Replaces International OEM number 46125DA
For a new version of this item use Item #: 110532
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435500) ... $20.01

Category: Engine Rebuild Kits

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Basic Engine Overhaul Kit, Less Bearings - For tractor models Super M and MTA, Super W6 and W6-TA. Also for 400 and W400, both to engine serial number 163807. (C264 CID Gas 4-cylinder engine using stepped head high compression pistons with 1-5/16 inch piston pin diameter). Kit contains sleeves and sleeve seals, pistons and piston rings (overbore from 4 inch to 4-1/8 inch), pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Part No: 130589) ... $630.00

Basic In-Frame Engine Kit - For tractor models Super M and MTA, Super W6 and W6-TA. Also for 400 and W400 both to engine serial number 163807. (C264 CID Gas 4-cylinder engine. Stepped head high compression pistons using 1-5/16 inch piston pin diameter). Kit contains complete sleeve and piston kit with rings (overbore from 4 inch to 4-1/8 inch), pins and retainers, upper gasket set (with head gasket) and pan gasket. (Part No: 184327) ... $555.00

Valve Overhaul Kit - Fits M, MV, O6, OS6, W6, Super M, MTA, Super W6, W6-TA (Gas 4 cylinder C248, C264). Kit includes valves, valve springs, valve keys, valve guides. Valve length 5.875 inch. (Part No: 184517) ... $279.00

Category: Engine Parts

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

No
Picture

Bare Block, Used -

For International tractor model Super M
Replaces International Casting number 365980R
Our used bare blocks are inspected for cracks. This requires 7 to 10 working day lead time
Block may require further cleaning, inspection, or machining before use
For a Remanufactured version of this part use Item #: 203951
Item ships via freight carrier please call 1-800-853-2651 for a freight quote
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 444418) ... $510.01

No
Picture

Bare Block, Used -

For International tractor models Super M, 400, 450 (gas)
Compatible with International Engine(s) C281
Replaces International OEM nos 356980R
Item ships via freight carrier please call 1-800-853-2651 for a freight quote
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 464596) ... $830.01

No
Picture

Bare Block, Used -

For International tractor models Super M, 400, 450 (gas)
Compatible with International Engine(s) C264
Replaces International Casting number 356980R
Our used bare blocks are inspected for cracks. This requires 7 to 10 working day lead time
Block may require further cleaning, inspection, or machining before use
For a Remanufactured version of this part use Item #: 203893
Item ships via freight carrier please call 1-800-853-2651 for a freight quote
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 444426) ... $830.01

No
Picture

Belt Pulley Block Off Plate -

For International / Farmall tractor models I6, M, MD, OS6, Super M, Super W6, W6, 400, 450, 560, 660
Replaces International OEM number 49053DB, 365128RI

(Part No: 126478) ... $46.70

No
Picture

Belt Pulley Block Off Plate, Used -

For International tractor models I6, M, MD, OS6, Super M, Super W6, W6, 400, 450, 560, 660
Replaces International OEM number 49053DB, 365128RI
For a new version of this item use Item #: 126478
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435886) ... $21.76

Camshaft - With nut and washer. For tractor models M, Super M, 400, 450 Gas. (Part No: 110901) ... $321.00

Camshaft Gear - 58 teeth. For tractor models M, MV, Super M, Super MTA, Super MV, 06, T-6, W-6, Super W-6, 400, and 450, all with the C248, C264, and C281 gas engines For gas powered tractors. Replaces: 6760D, 6760DB. (Part No: 108891) ... $147.00

Camshaft Gear, Used -

For International tractor models M, Super M, Super MTA, 400 (Gas), 450 (Gas)
Replaces International OEM number 6760DB
Teeth: 58
For a new version of this item use Item #: 108891
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 408891) ... $82.01

No
Picture

Camshaft, Used -

For International tractor models M, Super M, 400, 450
Compatible with International Engine(s) C248, C264, C281
Replaces International OEM number 48196DBX
W/ Nut and Washer
For a new version of this item use Item #: 110901
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435514) ... $156.01

No
Picture

Connecting Rod Bolt Lock Tab - .490 inch bolt hole diameter, 8 used per engine, sold individually. For tractor models (I6, M, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6-61, W6, 400, 450 gas, LP with C248, C264 and C281 engines 8 used), (WD9, WDR9 early diesels up to engine serial number 10265 16 used). (Part No: 167084) ... $6.90

Connecting Rod, Used -

For International tractor models M (V), MD (V), Super M, Super MTA, 400 (s/n 136834-163807), 450 (s/n 136834-163807)
Replaces International OEM nos 45750DAX
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 431317) ... $25.01

Crankshaft Gear - 29 Teeth. Fits the M, MV, Super M, Super MTA, Super MV, O6, T-6, W-6, Super W-6, 400, and 450, all with the C248, C264, and C281 gas engines. (Part No: 121569) ... $119.00

Crankshaft Idler Gear, Used -

For International tractor models M, Super M, Super MTA, 400, 450
Replaces International OEM nos 6362DX
Teeth: 41
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 498379) ... $78.01

No
Picture

Crankshaft, Premium Used -

For International tractor models Super M, 400, 450 (diesel)
Replaces International Casting number 261265R
For a Remanufactured version of this part use Item #: 205062

(Part No: 310236) ... $205.01

No
Picture

Crankshaft, Remanufactured, 45571DE -

For International / Farmall tractor models Super M, 400, 450 (Gas)
Replaces Casting number 45571DE, 45571DD
Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.

(Part No: 200232) ... $490.01

Cylinder Head - This is an LP Head for a 400, 450 LP. It will increase compression if replacing a GAS Head. Head includes guides and seats. Order part number 122658 LP high compression valve train kit which is required for engines switching from a gas cylinder head to the LP cylinder head as the LP head uses longer valves than the gas.As this is a BARE casting with guides and seats, customer is responsible for all final machining including head surfacing and machining for push rod clearance if needed. When mounting on a M or SUPER M there is no provision for the air cleaner breather line to rear of head, just block it off. For models 400, 450, M, Super M, Super MTA, MV, O6, OS6, W6, T6, Super MV, Super W6, Super W6TA, W400, W450, all with C248, C264 or C281 gas or LP engines. (Part No: 121586) ... $1059.01

Cylinder Head Stud - 1/2 inch x 7 1/16 inch. For gas and LP Models: I6, M, MTA, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6, U6, W6, 400, 450. (Part No: 178330) ... $19.20

Cylinder Head Stud - 1/2 inch x 6 7/8 inch. For gas and LP Models: I6, M, MTA, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6, U6, W6, 400, 450. (Part No: 178329) ... $19.20

Cylinder Head, Premium Used -

For International tractor models M, Super M, W6 (Gas)
Compatible with International Engine(s) C248
Replaces International Casting number 8060D, 8574DC
Our premium used cylinder heads are pinned and ready for assembly
Valve guides and valve seats are checked to meet OEM specifications or replaced as needed
Cleaned, surfaced, and pressure tested
Primer painted
For a Remanufactured version of this part use Item #: 200189

(Part No: 310264) ... $740.01

No
Picture

Cylinder Head, Remanufactured, 6336D -

For International / Farmall tractor models M, Super M, W6 (Kerosene)
Replaces International Casting number 6336D, 6776DB
Engine 248
Cylinders: 4
Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed
Cleaned and tested for cracks

(Part No: 205492) ... $870.01

No
Picture

Cylinder Head, Remanufactured, 8777D -

For International / Farmall tractor models M, Super M, W6 (Distillate)
Replaces International Casting number 8777D, 8790D
Casting No. 8777D, 8790D
Engine 248
Cylinders: 4
Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed
Cleaned and tested for cracks

(Part No: 205491) ... $1100.01

No
Picture

Cylinder Head, Used -

For International tractor models M, Super M, W6, W12
Replaces International Casting number 8777D, 8790D
Engine(s): 248
Cylinders: 4
Our used cylinder heads have been visually inspected for cracks
Cylinder head may require further cleaning, inspection, or machining before use
For a Remanufactured version of this part use Item #: 205491
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 405491) ... $540.01

No
Picture

Cylinder Head, Used -

For International tractor models M, Super M, W6 (Kerosene)
Replaces International Casting number 6336D, 6776DB
Engine(s): 248
Cylinders: 4
Our used cylinder heads have been visually inspected for cracks
Cylinder head may require further cleaning, inspection, or machining before use
For a Remanufactured version of this part use Item #: 205492
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 405492) ... $760.01

No
Picture

Cylinder Head, Used -

For International tractor models M, Super M, W6 (Gas)
Replaces International Casting number 8060D, 8574DC
Engine(s): 248
Cylinders: 4
Our used cylinder heads have been visually inspected for cracks
Cylinder head may require further cleaning, inspection, or machining before use
For a Remanufactured version of this part use Item #: 310264
Additional Handling and Oversize Fees Apply To This Item
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 400189) ... $540.01

Governor Spring - This Internal Governor Spring is 2.700 inches overall length with 0.110 inch wire diameter. It fits H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, T6, T9, W4 Through 9 Series, W6, W6TA, W9, WR9, WR9S, 300, 350, 400, 450, 600, 650, Wheatland: 400, 450. It replaces original part numbers 357012R1 and 49407DBX. (Part No: 179313) ... $13.10

Governor Throttle Shaft Rebuild Kit - This Governor Throttle Shaft Rebuild Kit fits: H, HV, I4, I6, M, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, T6, T6-61, U4, U6, W4, W6, 300, 350, 400, 450 all Gas and LP. Replaces: Cotter pin: 103361, Pin: 103494, Groove pin: 142952, Bushing: 45696D, Felt washer: 48493D, Lever: 6288D, Gasket: 48501D, 53877DB, 66272DA. Kit includes: lever, bushing, felt washer, (3) gaskets, groove pin, cotter pin, and pin. (Part No: 183906) ... $51.00

Governor Thrust Bearing - Bearing has a outer diameter of 1.575 inches, width of 0.472 of an inch, and an inner diameter of 0.510 of an inch. The lip has an outside diameter of 0.750 of an inch, the shaft has an diameter of 0.656 of an inch, and has 2 pin holes with an inner diameter measuring 0.186 of an inch. For the following models: H, HV, Super H, Super HV, M (gas), Super M (gas), Super MTA (gas), O4, O6, OS4, OS6, Super W4, W4, Super W6 (gas), Super W6TA (gas), W6 (gas), W9 (gas), WR9S (gas), B-275 (gas), B-276 (gas), 300, 350 (gas), 354 (gas), 400, W400, 444 (gas), 450 (gas), W450 (gas), 600 (gas), 650 (gas). Replaces 48250D, 48250DX, and ST506. (Part No: 183913) ... $80.00

Hand Starting Crank - For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450. Hand Starting Crank with Spinner. (Part No: 126697) ... $87.00

Push Rod, Used -

For International tractor models M, MD, MV, Super M, Super MTA
Replaces International OEM nos 355072R91
Replaces International Casting nos 48830DA
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 442720) ... $11.51

Ring Gear, Flywheel - For tractor models M, MD, 0DS6, Super M, Super MD, Super W6, WD6, W400, W450, W6, 400, 450, (560, 660 ALL DIESEL ONLY). This ring gear has 125 teeth, 15.72 inch outside diameter, .80 inches wide. (Part No: 103907) ... $88.00

No
Picture

Ring Gear, Flywheel - 125 Teeth For M, MD, Super M, Super MD, W-6, WD-6, 400, 450 Gas or Diesel460, 660 Diesel (Part No: 103907) ... $88.00

Second Speed Drive Gear, Used -

For International tractor models Super M, Super MTA, 400, 450, 560, 660
Replaces International OEM nos 358857R1
Teeth: 28
2nd Speed Driving Gear
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 498376) ... $147.01

No
Picture

Sliding Gear 1st and Reverse, Used -

For International tractor models M, MD, MV, Super M, Super MTA
Replaces International OEM nos 56533DA
Teeth: 44
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 439855) ... $79.01

Transmission Constant Mesh Gear, Used -

For International tractor models M, MD, Super M, Super MTA
Replaces International OEM nos 48717D
Teeth: 54
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 498375) ... $66.01

Valve Guide - Used in gas cylinder heads with the following casting numbers: 8060, 8060D, 8060DB, 8060DC, 8060DD, 8574, 8574D, 8574DB, 8574DC, 8574DD, 362174R1, 362174R2, 362433R1, 362433R2, 362920R1, 362902R2. These heads are used on C248, C264, and C281 engines. These engines were used one Farmall / International models: M, Super M, MTA, Super MTA, MV, Super MV, O6, OS6, T6, Super W6, W6, W6TA, 400, W400, 450, W450 (Part No: 189897) ... $4.40

Valve Lifter - This valve lifter / tappet is used on International engines C248, C264, C281, D248, D264, D281. Measures; Length: 2.655 inches, Diameter: 1.243 inches, Inside Diameter: 1.042 inches, Hole Inside Diameter: .255 inches. Replaces 45956D, 684414C1 (Part No: 192210) ... $24.40

Valve Seal -

For International / Farmall tractor models I6, M, MD, O6, OS6, Super M, Super W6, W6, W400, W450, WD6, 400, 450
Compatible with International Construction and industrial models T6, TD6
Compatible with International Engine (s) C248, C264, C281, D248, D264, D281
Replaces International OEM number 535166R1

(Part No: 167172) ... $2.40

No
Picture

Valve Service Kit - Cylinder HEAD Service KIT For gas models 400, 450, M, MV, O6, OS6, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6. Contains: springs, guides, locks, (no valves). (Part No: 131581) ... $165.00

Valve Set, Exhaust - Gas Engine - Valve length is 5.875 inch. Single Exhaust Valve (C248 CID Gas 4-cylinder engine). Model M and MV, O6, OS6, W6 and (C264 CID Gas 4-cylinder engine. Stepped head high compression pistons.) Models Super M and MTA, Super W6 and W6-TA. (Part No: 108496) ... $14.40

Valve Set, Intake, Gas Engine - Valve length 5.875 inch. Single Intake Valves (C248 CID Gas 4-cylinder engine). Model M and MV, O6, OS6, W6 and (C264 CID Gas 4-cylinder engine. Stepped head high compression pistons). For tractor models Super M and MTA, Super W6 and W6-TA. (Part No: 128742) ... $9.30

Valve Spring - For 248 CID Gas engine in: M, MV, OS6, W6. (Part No: 128517) ... $4.80

Valve Train Kit -

For International / Farmall tractor models I6, M, O6, Super M, Super MTA, Super W6, W6, 400 (Rowcrop and Wheatland), 450 (Rowcrop and Wheatland)
Replaces International OEM number 356951R1, 47277D, 364589R1, 364590R1, 41339D, 41349D, 61479HA
Engine: C248, C264, C281 gas / lp
Includes: Intake and Exhaust Valves, Springs, Retainers, Valve and Stem Retainer Clips
Roto Caps are not included
Valves will need to be ground to match seats

(Part No: 122658) ... $324.00

No
Picture

Valve Train Kit, Used -

For International tractor models I6, M, O6, Super M, Super MTA, Super W6, W6, 400 (Rowcrop and Wheatland), 450 (Rowcrop and Wheatland)
Replaces International OEM number 356951R1, 47277D, 364589R1, 364590R1, 41339D, 41349D, 61479HA
Engine: C248, C264, C281 gas / lp
Includes: Intake and Exhaust Valves, Springs, Retainers, Valve and Stem Retainer Clips
Roto Caps are not included
Valves will need to be ground to match seats
For a new version of this item use Item #: 122658
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435816) ... $213.01

Category: Engine Pistons and Sleeves

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Piston Pin Bushing - For 248 CID GAS or Distillate engines in: 400, M, MV, O6, OS6, Super M, Super MTA, Super W6, Super W6TA, W400, W6. Outside diameter 1.410 inches, inside diameter 1.312 inches. Price shown is for each, sold only in multiples of 4 items. (Part No: 107909) ... $14.30

Piston Sleeve - Overbore from 4 inch to 4-1/8 inch. For Gas tractor models 400, 450, MTA, Super M, Super W6, W400, W450, W6TA. (Part No: 128735) ... $65.00

No
Picture

Sleeve and Piston Kit - Sleeve and Piston Kit for tractor models Super M and MTA, Super W6 and W6-TA, 400, W400. (C264 CID Gas 4-cylinder engine. Stepped head high compression pistons.) Sleeves, pistons and rings, pins and retainers. Overbore from 4 inch to 4-1/8 inch. (Part No: 166579) ... $109.00

Category: Engine Rings

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Piston Ring Set - Standard - 4 Cylinder -

For International / Farmall tractor models Super M, 400 (both Distillate / Kerosene)
Compatible with International Engine (s) C264
Bore: 4.000"
Compression Rings per Piston: (3) @ .094"
Oil Rings per Piston: (1) @ .250"
Top Groove Size: .094"
Top Groove Style: Barrel Face Triple Chrome
2nd Groove Size: .094"
2nd Groove Style: Reverse Torsional Taper Face
3rd Groove Size: .094"
3rd Groove Style: Reverse Torsional Taper Face
4th Groove Size: .250"
4th Groove Style: Chrome Rail / Oil Ring Spacer
Sold as a complete 4 cylinder set

(Part No: 129084) ... $177.00

Piston Ring Set - Standard - 4 Cylinder -

For International / Farmall tractor models Super M, Super W6, W6, W400, 400 (all gas)
Compatible with International Construction and industrial models T6
Compatible with International Engine (s) C264
Bore: 4.000"
Compression Rings per Piston: (3) @ .094"
Oil Rings per Piston: (2) @ .250"
Top Groove Size: .094"
Top Groove Style: Barrel Face Triple Chrome
2nd Groove Size: .094"
2nd Groove Style: Reverse Torsional Taper Face
3rd Groove Size: .094"
3rd Groove Style: Reverse Torsional Taper Face
4th Groove Size: .250"
4th Groove Style: Chrome Rail / Oil Ring Spacer
5th Groove Size: .250"
5th Groove Style: Cast Iron Oil
Sold as a complete 4 cylinder set

(Part No: 130067) ... $315.00

Piston Ring Set - Standard - Single Cylinder Set -

For International / Farmall tractor models M, MD, Super M, W400, 400 (diesel)
Compatible with International Engine (s) D248, D264
Bore: 4.000"
Ring Size: Standard
Compression Rings per Piston: (1) @ .094" and (1) @ .125" and (1) @ .156"
Oil Rings per Piston: (2) @ .250"
Top Groove Size: .094"
Top Groove Style: Barrel Face Chrome
2nd Groove Size: .125"
2nd Groove Style: Reverse Torsional Taper Face
3rd Groove Size: .156"
3rd Groove Style: Reverse Torsional Taper Face
4th Groove Size: .250"
4th Groove Style: Chrome Rail / Oil Ring Spacer
5th Groove Size: .250"
5th Groove Style: Cast Iron Oil
Sold per cylinder

(Part No: 130064) ... $241.00

No
Picture

Piston Ring Set, 4 1\8 Inch Bore - Ring set for 1 pistons, 4 used per engine. For C264 CID gas 4 cylinder engine. Contains 3 compression 3/32 and one oil ring 1/4. For 400, Super M, Super MTA, Super W6, Super W6TA, W400 (Part No: 120854) ... $22.80

No
Picture

Piston Rings - Piston Ring Set, C264 Engine. For 264 CID Gas or LPG engine (4 inch standard bore). Complete set for 4 pistons. Each piston uses (3) 3/32 inch compression rings, and (1) 1/4 inch oil ring. Fits 264 Gas or LPG engine in M, Super M, MTA, MV, W6. Made in USA by Hastings. NOT for use with chrome sleeve liners. (Part No: 130066) ... $138.00

Category: Exhaust System

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Exhaust Manifold Nut -

For International / Farmall tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, I4, O4, OS4, Super H, Super HV, Super M, Super W4, Super W6, W4, W400, W450, 300, 350, 400, 450, 666, 686, 766, 886, 966, 986, 1066, 3688
Compatible with International Combine (s) 140, 453, 815, 1440
Compatible with International Construction and industrial models T6
Compatible with International Engine (s) C152, C164, C169, C175, C248, C264, C281, D312, D360, D414, D436
Replaces International OEM number 682987C1
Replaces Case IH OEM number 63460D, 43715D

(Part No: 168629) ... $2.10

Exhaust Manifold Pipe, Used -

For International tractor models H, I4, M, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 230, 300, 350, 400, 450
Compatible with Massey Harris tractor models 44 (Special), 55, 333, 444, 555
Compatible with Oliver tractor models Super 66, Super 77, Super 88, 66, 77, 88, 660, 770, 880
Replaces Mfg number 62476D
2" I.D. x 2-3/8" O.D. x 12"
For a new version of this item use Item #: 101547
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 454105) ... $10.01

Exhaust Manifold Pipe, Used -

For International tractor models H, I4, M, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 230, 300, 350, 400, 450
Compatible with Massey Harris tractor models 44 (Special), 55, 333, 444, 555
Compatible with Oliver tractor models Super 66, Super 77, Super 88, 66, 77, 88, 660, 770, 880
Replaces Mfg number 62476D
2" I.D. x 2-3/8" O.D. x 12"
For a new version of this item use Item #: 101547
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 454105) ... $10.01

Exhaust Manifold Stud -

For International / Farmall tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, I4, O4, OS4, Super H, Super HV, Super M, Super W4, Super W6, W4, W400, W450, 300, 350, 400, 450, 666, 686, 766, 886, 966, 986, 1066, 3688
Compatible with International Combine (s) 140, 453, 815, 1440
Compatible with International Construction and industrial models T6
Compatible with International Engine (s) C152, C164, C169, C175, C248, C264, C281, D312, D360, D414, D436
Replaces International OEM number 682840C1, 63459D

(Part No: 168630) ... $4.40

Exhaust Stack - 2 1\2 inch x 12 inch, Straight Chrome -

For International / Farmall tractor models H, M, Super H, Super M, Super MTA
Style: Straight
ID: 2-1/2"
Length: 12"
Color: Chrome
Discoloration will occur due to a fast startup not allowing the chrome exhaust pipe to warm up slowly thus causing the “bluing”

(Part No: 112164) ... $27.00

Exhaust Stack - 2-3\8 inch X 36 inch, Curved Chrome -

For International / Farmall tractor models H, M, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe)
Style: Curved
Inlet I.D.: 2-3/8"
O.D.Pipe: 2-1/2"
Length: 36"
Chrome Plated
Eliminates Muffler
Additional Handling and Oversize Fees Apply To This Item

(Part No: 115481) ... $165.88

Exhaust Stack - 2-3\8 inch X 36 inch, Curved Chrome -

For International / Farmall tractor models H, M, Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe)
Replaces International OEM number A29991
Style: Curved
Inlet I.D.: 2-3/8"
O.D. Pipe: 4"
Length: 36"
Chrome Plated
Eliminates Muffler
Additional Handling and Oversize Fees Apply To This Item

(Part No: 115486) ... $209.00

Exhaust Stack - 2-3\8 inch X 36 inch, Straight Chrome -

For International / Farmall tractor models Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe)
Replaces International OEM number 62476D
Style: Straight
Inlet I.D.: 2-3/8"
O.D. Pipe: 3"
Length: 36"
Chrome Plated
Eliminates Muffler

(Part No: 115487) ... $134.11

Exhaust Stack, Chrome, Curved - Double wall. 2 3/8 inch inlet inside diameter, 27 inches overall length, 3 1/2 inches outside diameter. For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Part No: 124224) ... $244.00

Exhaust Stack, Chrome, Straight - Double wall, 2 3/8 inch inlet, 3 1/2 inch outlet, 24 inches overall length. For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Part No: 124225) ... $190.00

Intake and Exhaust Manifold, Used -

For International tractor models M, Super M, Super MTA, Super W6, W6, 400, 450
Replaces International OEM number 358308R11, 362437R21, 8035DDX
With Pipe
For a new version of this item use Item #: 101545
Additional Handling and Oversize Fees Apply To This Item
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 434873) ... $95.01

No
Picture

Intake\Exhaust Manifold - Gasoline -

For International / Farmall tractor models I6, M, MTA, MV, O6, OS6, Super M, Super MTA, Super W6, W6, W400, W450, 400, 450
Replaces International OEM number 362437R21, 8035DDX
For models listed using gasoline
Manifold pipe included

(Part No: 101545) ... $186.98

Manifold - For Propane Tractors. Can also add performance when used on Gasoline Tractors. For gaskets, order part number R0055G. For short exhaust pipe, order part number R0055P. This manifold is used on Propane Head part number R5995. For tractor models 450, M, Super M, Super MTA, W6, Super W6, 400, MV, O6, Super MV, T6, W400. (Part No: 189639) ... $347.00

No
Picture

Manifold - Propane -

For International / Farmall tractor models M, MV, O6, Super M, Super MTA, Super W6, W6, W400, 400, 450
Compatible with International Construction and industrial models T6
Replaces International OEM number 358308R11
1 piece manifold like original
This manifold will increase horsepower on gasoline tractors only
For manifold gasket set use Item #: 101547

(Part No: 189639) ... $347.00

Manifold Gasket - This Manifold Gasket Set is used with 358308R11 manifold. Replaces Manifold Gasket: 46173DC, Carb Gasket: 21632D, 31336D, 530681R2. (Part No: 101546) ... $8.70

Manifold Pipe - Can be used with the following manifolds 362437R21, 161158A, 161818A, 761615M91, 4512715, R0947, L415. For tractor models M, Super M, W6, T6, 400, W400, 450, W450. (Part No: 101547) ... $18.40

Muffler - Restoration Quality -

For International / Farmall tractor models I6, M, MD, Super M, Super MTA, Super W6, TD6, W6, W400, W450, 400, 450
Replaces International OEM number 251116R92, 350601R93, 350601R94, 355870R91, 357288R92, 360078R91, 45805DB
High Temperature Paint
Inlet Length: 1-5/8'
Inlet ID: 2-13/32"
Shell Length: 15-1/2"
Outlet Length: 13"
Outlet OD: 2-3/8"
Overall Length: 30"

(Part No: 164538) ... $94.00

Muffler Clamp With Hardware - Muffler clamp with hardware. 2 1/2". For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, 706, H, HV, M, MD, Super H, Super HV, Super M, Super MD, Super MTA, Super W6, W4, W6, WD6. (Part No: 178185) ... $12.00

Muffler Eliminator - 2-3\8 inch X 24 inch, Straight Chrome -

For International / Farmall tractor models H, M, Super H, Super M, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe)
Inlet I.D: 2-3/8"
O.D. Pipe: 3"
Length: 24"
Straight Pipe
Chrome Plated
Eliminates Muffler

(Part No: 115491) ... $81.17

Muffler Oval - Muffler. Vertical muffler for tractors. 6 inch. Oval body replaces oval body mufflers. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, total length 29 inches, diameter 6 inch round body. For gas tractor models: H and Super H, M and MV Super M and Super MTA, W4 and Super W4, W6 and Super W6, W6TA, (300 and 350 with C-175 gas), (400 and 450 with C-281 gas or D-281 diesel), (460 and 606 with C221 gas or D-236 diesel), (560 with C-263 gas or D-282 diesel). (Part No: 100821) ... $70.00

Muffler, Aluminized - Vertical muffler for gas tractor, fits engines C221 and C263. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, length 29 inches, diameter 6 inches, round body. Uses MC212 Muffler Clamp. For tractor models H, M, MD, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 450, 606, 2606, 656, 2656. Diesel engines D166, D188, D236, D282, models 340, 504, 2504, 3514, For 2500, 2504, 2606, 2656, 340, 3514, 3616, 450, 460, 504, 606, 656. Replaces 350601R95, 370773R91, 357288R92, 370644R91, 403551R1. For a black version order Item# 100807 (Part No: 185584) ... $44.80

Muffler, Black - This is a black version of 370644R92. Vertical muffler for gas and diesel applications.Fits engines C221 and C263. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, length 29 inches, diameter 6 inches, round body. Uses MC212 Muffler Clamp. For tractor models H, M, MD, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 450, 606, 2606, 656, 2656. Diesel engines D166, D188, D236, D282, models 340, 504, 2504, 3514, For 2500, 2504, 2606, 2656, 340, 3514, 3616, 450, 460, 504, 606, 656. Replaces 350601R95, 370773R91, 357288R92, 370644R91, 403551R1 (Part No: 100807) ... $37.00

Vertical Muffler - Stainless Steel. Also replaces 251116R92, 360078R91, 357288R92, 350601R94, 355870R91, 350601R93. For tractor models M, MD, MV, Super M, Super MD, Super MTA, Super W6, Super WD6, TD6, W6, WD6, 400, 450. Polished stainless steel can and most likely will discolor from extreme heat. Replaces: 251116R92, 350601R93, 350601R94, 355870R91, 357288R92, 360078R91, 45805DB (Part No: 164539) ... $175.01

Category: Fuel System / Air Intake

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: M, MD, WR9S, Super WD9, 400, 450, W400, W450, 460, 504, 544 diesel, 455 diesel, 2544 diesel, 5606, Gas powered combines: 403 and 453 Hillside, 503, 615, 715. Can replace Donaldson P02-0227, also replaces 101965A, 10P871, 1125804, 1508881M1, 3119347, 365413R1, 71125804, 73186, 73533, 80073533, C0NN9A663A, F3446R, L60631, R28794 (Part No: 157279) ... $8.80

Air Cleaner Cap, Fits INSIDE pipe - For tractor models M, MD, Super M, Super MTA, W6, WD6, Super W6, 400, 450. (Part No: 111658) ... $41.10

Air Cleaner Pipe - 2-1/4 inch outside diameter. For tractor models M, MV, Super M, Super MV, MTA, Super MV-TA, (Super W6 serial number 3951 and up), Super W6-TA, 400, 450, W400, W450 all gas or LP. Replaces 51441D. (Part No: 126383) ... $42.00

Carburetor Float - Float. For Updraft International Carburetors with throat size 1-1/4 inch or 1-3/8 inch. Dimensions: 2 3/16 inch length x 1 3/16 inch height, outside diameter 3 1/2 inches. For 2606, 2706, 300, 350, 400, 450, 460, 560, 600, 606, 650, 660, 706, M, MV, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6, W9, WR9, WR9S. (Part No: 107990) ... $20.40

Carburetor Fuel Line Fitting With Strainer - Fits INTERNATIONAL carburetors: 356948R92, 35865R91, 366066R91, 367258R92, 367259R92, 372723R92, 378196R94, 379813R91, 380956R91, 381984R91, 388297R92, 388424R92, 388425R96, 390082R92, 396197R93, 45108DB, 45108DC, 50981DA, 50981DB, 50983DB, 52714D, 52814DA, 52815D, 52815DA, 533622R91, 53873DF, 53873DH, 539575R91, 56543DE, 60329DA. 1/4 inch pipe to 5/16 inch flare. (Part No: 111514) ... $16.50

Carburetor Kit -

For International / Farmall tractor models M, Super H, Super M, Super W4
Replaces International OEM number 356948R92, 357231R92, 358065R91, 358554R91, 47387DC, 50983DC

(Part No: 100730) ... $23.40

Carburetor Kit, Basic - Kit for IHC 406804R91, 361525R92, 363741R93, 367258R92, 380956R96, 381984R95, 386424R96, 388297R94, 372723R92, 379813R95, 396197R93, 539575R91, 388425R96, 533622R91, 358065R91, 358554R91, 356948R92, 357231R92 carbs on 2544, 300, 350, 460, 544, 560, 656, 660, 706, 756, 766, 806, Super H, Super M, Super W-4. (Part No: 100731) ... $17.50

Carburetor Kit, Basic - For M, MV, 6 Dist. with OEM number 47387DB, or with OEM number 50983DB. For Super M, MTA with OEM number 356948R92. For W9, WR9 with OEM number 52814D, 52815D and 60329DA. For 300, 350, 400, 450 all with OEM number 361525R92, 361525R91.: For Super H with OEM# 358065R91 (Part No: 120899) ... $26.70

Carburetor Kit, Comprehensive - International number 356948R92, 357231R92, 358065R91, 358554R91, 47387DB with 8557DX body, 50983DB with 8557DX body, 52814D, 52815D, 60329DA. Includes gaskets, needle, seat, and throttle shaft. (Part No: 112361) ... $33.15

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 362957R91, 356948R92. For the following tractor models: Super M, 400. Center-to-Center on the mounting bolts is 2 3/4 inches. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Part No: 207119) ... $430.01

Carburetor, Used -

For International tractor models Super M, Super MTA, W9, 600
Replaces International Mfg number 356948R92, 357231R91
For a Remanufactured version of this part use Item #: 207119
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 407119) ... $195.01

Comprehensive Carburetor Kit - For tractor models Super M, Super MTA and Super MV. Use with International carburetor number 356948R91, 356948R92, 357231R91, 357231R92 (Part No: 170621) ... $70.00

Fuel Cap - For A, Super A, AV, B, BN, C, Super C, H, Super H, M, Super M, Super MTA, Cub, Cub Lo-Boy, 100, 130, 200, 230, 300, 350, 400, 450. Tall Cap is 2 1/2 inches tall, Triple Baffle Style. Replaces 361910R1, 23995DC (Part No: 108051) ... $24.00

Fuel Cap - 1 15/16 inch overall outside diameter fits many: 240, 300, 350, 400, 450, 600, 650, H, HV, M, MD, MDV, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super W6, Super WD6, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Part No: 116503) ... $6.80

Fuel Cap, Chrome, Unvented - Fits MOST of the following GAS and Diesel tractors: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, 04, 06, W4, W6, Super W4, Super W6, W9, 100, 130, 140, 4156, 4166, 4168. Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. (Part No: 107987) ... $8.50

Fuel Cap, Top Vented - 2-11/16 inch inside diameter, 1.500 inch height (including splash guard) and 1.118 inch height cap only. Says "Buy Clean Fuel Keep it Clean". For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy (WILL NOT FIT 154, 184, 185), F12, F14, F20, F30, H, HV, I4, I6, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD18A, TD20, TD6, TD9. (Part No: 121475) ... $13.00

Fuel Cap, Vented - For MOST Models: A, Super A, B, C, Super C, H, Super H, M, Super M, Cub, 100, 130, 200, 230, 300, 350, 400, 450. Says Buy Clean Fuel . Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. Replaces IHS226, AR369R, AD709R, AH83351, B824, 7A824, 161945A, 30-3049558. (Part No: 107951) ... $13.10

Fuel Line - For tractor models M, MV serial number 24215 and up, Super M and Super MV. Fuel line, metal pipe from fuel strainer to carburetor with two nuts. Restoration quality. Replaces 56512DX, 58363DX, 60684DX. (Part No: 172777) ... $50.00

Fuel Pipe Coupling Nut -

For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, F12, F14, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, Super A, Super C, Super H, Super M, Super W4, TD6, TD9, W4, W6, W12, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 686, 706, 756, 806, 826, 856, 2444, 3514, 3616
Compatible with International Combine (s) 303, 403, 503, 615, 715
Replaces International OEM number 29899D, 700155R11, 700153R11
1/2"-20 Hi-duty tube fitting
5/16" O.D.

(Part No: 112642) ... $2.40

Gas Line With FTG - Buna-N flex gas line. For tractor models 300, 350, 400, H, M, Super H, Super M. Line has 5/16 Inverted Flare Fittings. Additional hardware may be required. Replaces part numbers: 60684D, 58363DX, 56512DX, 56451DX, and 359481R11. (Part No: 115038) ... $23.30

Governor Control Sector - Governor control sector with pivot pin for tractors: H and HV, Super H and Super HV, M and MV, Super M and Super MV. (Part No: 114409) ... $70.00

Governor Shaft - Governor Throttle Rod To Carburetor. For 400, 450, M, MV, O6, OS6, Super M, Super W6, W400, W450, W6. (Part No: 105379) ... $52.00

Insulating Fuel Tank Pad -

For International / Farmall tractor models Hydro 70, Hydro 86, M (s/n FBK24215-later, Gas), MD (s/n FBK24215-later, Gas), Super H (Gas), Super HV (Gas), Super M (Gas), Super MTA (Gas), 240 (Farmall s/n 501-2293, IH s/n 501-6137), 300 (Gas), 330, 340 (Farmall s/n 501-3449, IH s/n 501-3024), 350 (Gas), 404 (Gas), 424 (Gas and Diesel), 444 (Gas and Diesel), 544 (Gas and Diesel), 606 (Gas and Diesel), 666, 686, 706 (Gas and Diesel), 756 (Gas and Diesel), 766 (Gas and Diesel), 826 (Gas and Diesel)
Compatible with International Construction and industrial models 2404 (Gas), 2424 (Gas and Diesel), 2444 (Gas and Diesel), 2504 (Gas and Diesel)
Replaces Case IH OEM number 60671D

(Part No: 163917) ... $3.10

Lift All Control Rod Spring\ Flat Hold Down Spring -

For International / Farmall tractor models H, HV, M, MD, MTA, Super H, Super M, Super MTA
Replaces International OEM number 15137E

(Part No: 126555) ... $19.20

Pre-Cleaner Assembly, Used -

For International tractor models I6, M, MD, MTA, O6, OS6, Super M, Super W6, W6, W400, W450, 400, 450
Compatible with International Construction and industrial models TD6
Replaces International OEM number 59096D
Complete with dust bowl
2-1/2" ID Base
For a new version of this item use Item #: 112510
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 412510) ... $49.01

Precleaner Assembly - Complete, glass dust bowl assembly, 2-1/4 inch inside diameter base, just like the original. For tractor models M, MD, Super M, MTA, W6, WD6, I6, O6, ID6, OS6, ODS6, Super WD6, 400, W400, 450, W450. (Part No: 112510) ... $64.00

Precleaner Bowl - Glass bowl for pre-cleaner assembly 59095D, 59096D. (Just like the original). Tractors: H, Super H, HV, I4, O4, OS4, W4, Super W4, 300, 350, M, MD, Super M, MTA, W6, WD6, I6, O6, ID6, OS6, ODS6, Super WD6, 400, W400, 450, W450. (Part No: 111710) ... $10.10

Sediment Bowl Assembly - Fuel Strainer assembly with 2.25 inch bowl, 1/8 inch pipe thread to fuel line, 3/8 inch pipe to tank for gasoline tractors: H, HV, M, Super M and MTA, O4, OS4, W4, 460, 560, 600, 650, 656, 660, 706, 756, 766, 806, 826, 856. Replacement bowl available as part S.65504. Replaces OEM numbers 358245R91 and 370832R91. (Part No: 105393) ... $22.00

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. (Part No: 105364) ... $3.50

Throttle \ Governor Control Spring - This Throttle Lever Spring Fits: H, HV, M, MTA, MV, Super H, Super HV, Super M, Super MV. Measures 1.322 inch overall length, 0.925 Inch Outside Diameter. This is used one stamped steel throttle lever assemblies, not cast iron ones. Replaces: 51349D (Part No: 179413) ... $7.30

Throttle Dog - This Throttle Dog is used with square tooth throttle assembly/ governor control handle. Replaces 361245R1 (Part No: 110950) ... $7.20

Throttle Lever, Used -

For International tractor models H, HV, M, MD, MTA, Super H, Super M
Replaces International OEM number 51348DAX
Replaces International Casting nos R0602
Attaches with two bolts
M&W style
For a new version of this item use Item #: 110304
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 463597) ... $15.01

Throttle Plate Assembly - This is a Square Tooth Throttle Control Assembly (Governor Control Assembly) used on H, HV, M, MTA, MV, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA. Replaces: Handle: 361244R11, Sector: 361246R11, Assembly: 366727R91 (Part No: 114409) ... $70.00

Throttle Plate Assembly - H, HV, M, MTA, MV, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA; Replaces: Saw tooth Lever: 51348DAX, Saw tooth sector: 51351DBX, 51351DBXA (Part No: 114409) ... $70.00

Category: Gaskets

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Push Rod Side Cover Gasket - Replacing OEM part numbers 49029DA, 49029DB this gasket is used on Gas and LP models: M, I6, Super MVTA, MTA, MV6, OS6, Super M, Super MTA, Super MV, Super W6, Super W6TA, W6, 400, 450 (Part No: 154785) ... $18.00

Category: Gauges

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Amp Gauge - D-O-C Style - with IH Logo For Super A, Super C, H, Super H, M, Super M, Super MTA, Cub (From 1955), W4, W6, 200, 230, 240, 300, 350, 400, 450. Replaces 393334R91, 378424R91, 360053R92, IHS395. (Part No: 102132) ... $19.70

Amp Gauge, Original Style - Gauge, ammeter has 20-0-20 range. Original Style. IH Logo. Fits 2 inch diameter hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418, 354473R91 (Part No: 121652) ... $24.20

Amp Meter Gauge, Used -

For International tractor models Cub (1955-later), Cub Lo-Boy, Cub 154, Cub 184, Cub 185, H, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, TD5, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 460, 560, 600, 650, 660
Replaces International OEM number 360053R91, 360053R92
For a new version of this item use Item #: 102132
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 460496) ... $7.01

Amp gauge - Gauge, ammeter has 20-0-20 range. Not Exactly like original. IH Logo. Fits 2 inch diameter hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418. (Part No: 102133) ... $19.70

Fuel Gauge Cap - This vented fuel cap has a built in gauge. Overall length is 14 3/4 inches. Uses gasket part number 23977DA - sold separately. For models I6, M, MD, MDV, MV, O6, Super M, Super MD, Super MDV, Super MTA (Diesel), Super MV, Super W6, Super WD6, W6, WD6. (Part No: 160451) ... $107.00

No
Picture

Fuel Gauge Cap Gasket - Gasket fits our Fuel Gauge Cap part numbers 365498R91, 365495R91 and 365499R91. (Part No: 110635) ... $3.00

Oil Pressure Gauge -

For International / Farmall tractor models I6, M, Super M, Super MTA, Super W6, Super W9, TD6, TD9, W6, W9
Replaces International OEM number 258634R91, 702027C1
IH Logo on Face
Dash Mounted
0-45 PSI

(Part No: 121660) ... $44.30

Oil Pressure Gauge - Zone Style - with IH Logo with studs - Does not include bracket. For H, Super H, M, Super M, Super MTA, W-4, Super W4, W-6, Super W6, W-9, Super W9 (from 1947). (Part No: 110849) ... $49.57

Temperature Gauge -

For International / Farmall tractor models B, C, H, M, Super A, Super C, Super H, Super M, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400
Replaces International OEM number 67135D
Lead Length: 4'
For a temperature gauge with a 6' lead use 108050
For a temperature gauge with a 8' lead use 118328

(Part No: 108055) ... $37.90

Temperature Gauge -

For International / Farmall tractor models B, C, H, M, Super A, Super C, Super H, Super M, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400
Replaces International OEM number 370259RH
Lead Length: 8'
For a temperature gauge with a 4' lead use 108055
For a temperature gauge with a 6' lead use 108050

(Part No: 118328) ... $30.40

Temperature Gauge, Used -

For International tractor models B, C, H, M, Super A, Super C, Super H, Super M, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400
Replaces International OEM number 67135D
Lead Length: 4 feet
For a new version of this item use Item #: 118328
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 456993) ... $18.51

Temperature Gauge, Used -

For International tractor models B, C, H, M, Super A, Super C, Super H, Super M, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400
Replaces International OEM number 353868R91, 369849R91, 393476R91, 53690R2
Lead Length: 8 feet
For a temperature gauge with a 4 foot lead use 108055
For a temperature gauge with a 6 foot lead use 108050
For a new version of this item use Item #: 118328
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 418328) ... $17.51

Water Temperature Gauge with IH Logo - TEMPERATURE GAUGE WITH 19 inch LEAD and IH Logo. FITS MODELS A, H, M, Super A, Super M, Super MTA (300, 350 UTILITY). Fitting may require the OEM Adapter 51510D which we do not have available. (Part No: 111254) ... $37.80

Category: Hitch / Drawbar

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

3 Point Conversion Kit - For M, MTA, Super M, Super MTA, MD, 400, 450, 460, 504, and 560 also for 544 and 656 with spacer #861188. Two hydraulic cylinders included. (Order optional bracket #861190 to use swinging drawbar) Cat. I/II Weight is 260Lbs. Note: HK-11062 is similar to the picture shown but has two cylinder locations. (Part No: 111430) ... $999.00

Drawbar Brace Rod -

For International / Farmall tractor models H (s/n 36680-later), M (s/n 21091-later), Super H, Super M, 300, 340, 350, 400, 450, 460, 544, 656, 664, 666
Replaces International OEM number 57233DA
Forged
17-1/4" C.C. hole

(Part No: 126337) ... $62.00

No
Picture

Drawbar Brace Rod, Used -

For International tractor models H (s/n 36680-later), M (s/n 21091-later), Super H, Super M, 300, 340, 350, 400, 450, 460, 544, 656, 664, 666
Replaces International OEM number 57233DA
Forged
17-1/4" C.C. hole
For a new version of this item use Item #: 126337
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435879) ... $31.01

Drawbar Pin Retainer Plate - Used on the following Farmall / International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inches long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D (Part No: 112643) ... $7.50

Drawbar Pin, Front - For tractor models with swinging drawbar, 400, 450, 560, 660, M, MD, Super M, Super MD. (Part No: 112536) ... $19.30

Drawbar Roller - For tractor models H, Super H, M, Super M, 300, 330. Replace 356563R93 (Part No: 111251) ... $67.00

No
Picture

Drawbar Roller, Used -

For International tractor models H, Hydro 70, Hydro 86, M, Super H, Super M, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 656, 664, 666, 686, 2504, 2544, 2656
Replaces International OEM number 356563R93
For a new version of this item use Item #: 111251
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 411251) ... $34.01

Drawbar Strap - For tractor models H, Super H, M, Super M, 300, 350. (Part No: 110900) ... $69.65

Swinging Drawbar - For tractor models M, MD, Super M, Super MD. Swinging Drawbar. Dimensions: 1 inch thick, 52-1/4 inches center to center. (Part No: 111395) ... $200.00

Swinging Drawbar Pin - For tractor models H, Super H, M, Super M, 300, 330, 340, 350, 400, 450, 460, 560, 660. (Part No: 109900) ... $54.00

Swinging Drawbar Roller Shaft Support -

For International / Farmall tractor models H, HV, M, MD, MTA, Super H, Super HV, Super M, Super MTA
Replaces International OEM number 356653R91

(Part No: 126738) ... $68.00

No
Picture

Swinging Drawbar, Used -

For International tractor models M, MD, Super M
Replaces International OEM number 357529R1
52-1/4" Long
1" thick
For a new version of this item use Item #: 111395
Additional Handling and Oversize Fees Apply To This Item
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 411395) ... $105.01

Three Point Hitch - This 3-point hitch kit fits Rowcrops and Utilities without fast hitch. It also allows use of original draw bar. Kit includes (Cat # 1 on tractor end and Cat # 2 on equipment end, and 2 hydraulic 2 way cylinders, but does not include hoses. Please note, this hitch exceeds size limitations for UPS. This hitch kit must ship via LTL freight truck. (Part No: 1000051) ... $1799.99

Category: Hydraulic System

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Hydraulic Auxiliary Control Valve Rod - Hydraulic Auxiliary Control Valve Control Rod is 43-1/2 inches long with a 3/8 inch diameter. It fits the following tractors with optional live hydraulics and auxiliary control valve: M, MD, MDV, MTA, MV, Super M, Super MD, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super MTA. It replaces original part number 359479R91 (Part No: 179699) ... $45.50

Hydraulic Dipstick - Mounts inside the hydraulic pump breather fill pipe, 11.80 inches long. For tractor models H, HV, M, MV, MD, MDV, Super H, Super HV, Super M, Super MV, Super MD, Super MDV, 140 Combine and 120 Windrower. All equipped with lift all countershaft driven hydraulic pump. (Part No: 126480) ... $32.50

No
Picture

Hydraulic Dipstick, Used -

For International tractor models H, HV, M, MD, Super H, Super M
Compatible with International Combine(s) 140
Replaces International OEM number 15158EX
Mounts inside the hydraulic pump breather fill pipe
11.800" Long
For a new version of this item use Item #: 126480
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435887) ... $17.76

Hydraulic Manifold - Hydraulic Pump Flange, Hydraulic Manifold, Port Block is used on (M, Super M, 400, 450 Gas or Diesel), Super W6, Super W9, Super WD6, Super WD9, W6, W9, WD6, WD9, 600, 650. 3/4 inch NPT inlet and outlet. Threaded for hydraulic hose. Must use rubber hose lines. (Part No: 115188) ... $74.00

Hydraulic Pump - For block style lines that mount to bottom of pump. This is a cast aluminum style and will not directly replace cast iron style (it will replace if you have a plate manufactured to adapt the type of hose connections as is on your old pump). For tractor models Super M, Super MTA, Super W6, Super W9, 400, 450. All Gas with Live Hydraulics. Replaces 128190C91, 357214R92, 362175R94 (Part No: 102180) ... $644.00

Hydraulic Pump Control Rod - Hydraulic Pump Control Rod is used on the following tractors with belly mounted hydraulic pumps: M, MD, MDV, MV, Super M, Super MD, Super MDV, Super MV. The length of this rod is 39-3/4 inches long with a 3/8 inch diameter. It replaces original part number 15092EX (Part No: 179211) ... $48.80

Hydraulic Pump Control Rod - Hydraulic Pump Control Rod is 22-1/4 inches long with a 3/8 inch diameter. One end is 3/8 inch -16 UNC threads. It is used on the following tractors with live hydraulic pump and reservoir mounted under the fuel tank: MTA, Super M, Super MD, Super MDTA, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA. It replaces original part number 358458R11. (Part No: 179701) ... $48.80

Hydraulic Pump, Used -

For International tractor models Super M, Super MTA, Super W6, Super W9, W6, W9, 400, 450
Replaces International OEM number 128190C91, 357214C94, 362175R93, 363780R93, 87455830, B128190C91, IH128190N
Uses OEM manifold port
To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters
For a new version of this item use Item #: 102180
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 402180) ... $389.01

Hydraulic Pump, Used -

For International tractor models M, Super M, Super W6, 400, 450
Replaces International OEM nos 128190C91, 357214R92, 362175R93
Mounts between the distributor and engine
M&W style pump with 2 pipe thread ports on top
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 434157) ... $770.01

No
Picture

Hydraulic Pump, Used -

For International tractor models M, Super M, Super W6, 400, 450
Replaces International OEM nos 201PX
M&W style pump with 2 pipe thread ports on top
Mounts between the distributor and engine
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435348) ... $700.01

Port Block Kit -

For International / Farmall tractor models Super M, Super MTA, 400, 450
Replaces International OEM number 208-1015
For CharLynn
Used with AM207-1015 Orbit Motor

(Part No: 111506) ... $89.00

Seal, Countershaft Driven Hydraulic Pump - This Seal is used as a countershaft driven hydraulic pump seal or a hydro charge pump seal on Farmall / International: H, M, HV, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV, Hydro 86, Super MV, 544, 656, 666, 2544. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Part No: 128541) ... $7.30

Category: Lights

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Headlight Gasket - Black rubber, like original with staple. For use in 4 � inch diameter light assembly. Used with 53523D.For the following tractors: Cub up to serial number 165152, Super C up to serial number 159454, TD with bulb style light, (Super WDR9, WD9 up to serial number 1041), W6 up to serial number 3950, (Super H, Super HV up to serial number 19233), ( Super AV, Super A, W4 all early up to 1953), (Super M, Super MD up to serial number F28174 and Louisville built up to serial number L504508), A, B, C, H, M, I4, I6, I9, ID6, ID9, AV, BN, MDV, MTA, MV, TD6, W9, O4, WR9, O6, ODS6, OS4, OS6, Super MD, Super MTS, Super W4, WD6, WR9S. Replaces AA2329R, 53527D. (Part No: 112484) ... $4.00

Headlight Lens - Replacement Glass Lens is 4.75 inch outside diameter for IH (45640DB) Headlight Assemblies. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, W4, W6, W9, WD6, WD9. (Part No: 111330) ... $15.20

Headlight Lens Gasket - Gasket, 4 5/8 outside diameter for lens in sealed beam units 358890R92. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: 110589) ... $4.00

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: Cub up to serial number 165152, Super C up to serial number 159454, TD with bulb style light, (Super WDR9, WD9 up to serial number 1041), W6 up to serial number 3950, (Super H, Super HV up to serial number 19233), ( Super AV, Super A, W4 all early up to 1953), (Super M, Super MD up to serial number F28174 and Louisville built up to serial number L504508), A, B, C, H, M, I4, I6, I9, ID6, ID9, AV, BN, MDV, MTA, MV, TD6, W9, O4, WR9, O6, ODS6, OS4, OS6, Super MD, Super MTS, Super W4, WD6, WR9S. Replaces 53523D, AA3238R. (Part No: 112482) ... $12.00

Headlight Reflector - 4 inch - This headlight reflector repairs OEM " Flatback" type headlights 45640DB and AA3075R. Does not come with bulb. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: 185606) ... $10.70

Headlight Support - For H, Super H, M, Super M, Super MTA (Part No: 105337) ... $111.00

Headlight Support Bracket - For H, Super H, M, Super M, Super MTA. Headlight Support Bracket. (4156R) (Part No: 105337) ... $111.00

Headlight Trim Ring - Moulding trim ring for 5 inch teardrop headlights or rear lights on tractors (painted). For tractor models 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 450, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super WD9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Part No: 112980) ... $19.47

Knob - Knob for combination rear light and tail light switch (used only with switch body with 15/32 inch shaft). For tractor models 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W6, Super WD9, Super A, WR9S. (Part No: 179762) ... $8.72

Light Clamp - Clamp, lamp assembly for tractors. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W6, Super A, W4, W6, W9, WD6, WD9. (Part No: 178025) ... $10.00

Light Switch Knob - Old style for rotary light switches. For tractor models A, AV, B, BN, C, H, HV, M, MD, MV, MDV, W4, W6, W9, WD6, WD9, WR9, WDR9, O4, OS4, I4, I6, I9, ID6, ID9, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MV, Super MDV, Super MTA, Super W4, Super W6, Super W6TA, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, Cub. (Part No: 179711) ... $11.10

Light Switch, 12 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: 125672) ... $55.00

Light Switch, 12 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: 107984) ... $40.50

Light Switch, 12 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: 178354) ... $49.40

Light Switch, 12 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: 107095) ... $38.70

Light Switch, 6 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: 178387) ... $49.40

Light Switch, 6 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: 125715) ... $49.40

Light Switch, 6 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: 178351) ... $29.60

No
Picture

Light Switch, 6 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: 107094) ... $27.00

Rear Combo Light - 6 Volt Rear Combo Light Assembly with Red Jewel Light with rotary switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. Replaces 355914R91. (Part No: 105335) ... $74.00

Rear Combo Light Assembly -6Volt - Replaces 355911R91, manufactured to restoration standards. Rear combo light assembly, 6 Volt. Includes red jewel light with rotary switch. For: Cub, Super A and AV, C, Super C, H, HV, Super H and HV, M, MD, MDV, MV, Super M and MTA, O4, o6, ODS6, OS6, W6, WD6, W6TA, Super W6, W9, WDR9, WR9, Super W9, 100, 130, 140, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 105335) ... $74.00

Sealed Beam 6 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. Bulb measures 4.375 inches outside diameter. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR9. Verify dimensions. (Part No: 111938) ... $40.00

Sealed Beam Assembly - 6 Volt For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240. (Part No: 105333) ... $41.50

Sealed Beam Bulb 12 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. This is a 12 volt sealed beam unit. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR6, WDR9. Replaces 358893R92, 358893R91 (Part No: 161211) ... $60.00

Sealed Beam Bulb, Red and White - 4.5 inch diameter, 12 volt. For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. (Part No: 116014) ... $24.68

Switch, Worklight, with Knob - For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. Replaces 359682R91. (Part No: 185566) ... $17.90

Tail Light Lens - 5 inch lens, combination rear light and tail light. For 100, 130, 200, 230, 300, 340, 350, A, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A.350478R1 (Part No: 111330) ... $15.20

Category: Oil System

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

No
Picture

Engine Oil Level Petcock, Used -

For International tractor models A, B, C, F12, F14, F20, F30, H, I4, I6, M, O4, O6, Super A, Super C, Super H, Super M, Super W4, Super W6, W6, W9, W12, W30, 10-20, 15-30, 22-36
Replaces International OEM number 1998TA
3/8" pipe thread
For a new version of this item use Item #: 126590
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435892) ... $9.01

Oil Filler Cap - This Oil Fill Cap does not come with hardware or gasket. We do not have those parts available. For tractor models 300, 350, 400, 450, H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MTA. (Part No: 126605) ... $15.00

Oil Filler Cap, Used -

For International tractor models F12 (s/n 56316-later), F14, H, HV, I4, I6, M, MD, MTA, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, TD6, TD9, W4, W6, W9, W12 (s/n 2182-later), WD6, WD9, 300, 350, 400, 450, 600, 650
Replaces International OEM number 4819D, 4819DX
3/8-16 thread
For a new version of this item use Item #: 126605
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435893) ... $5.76

Oil Filter - Oil filter element, cartridge type with gasket. For gas engines: C113, C152, C248, C264, C281, Element is 3 7/16 inches in diameter and 7 1/2 inch overall length. Replaces: 355010R91, 360431R91, 376375R91, 63858D (Part No: 111121) ... $19.80

Oil Level Indicator - This oil level indicator is a replacement for the oil level petcock. Remove the original petcock and replace with this conversion. Has 3/8 inch NPT male fitting. Dipstick is 4.91 inches long. For models using the original oil petcock in A, AV, B, BN, C, F12, F14, F20, F30, H, HV, I12, I14, I4, I6, M, MTA, MV, O12, O14, O4, O6, OS4, Regular, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, W12, W14, W30, W4, W6, 10-20, 15-30, 22-36 and early models of 350, 400, W400, W450 used to replace top oil checking petcock. Originally used as an aftermarket product in the 1940's. (Part No: 1998TA-New) ... $46.50

Oil Level Petcock - This oil level indicator system uses 2 petcock valves. Used on models A, AV, BN, C, F12, F14, F20, F30, H, HV, M, MTA, MV, Regular, Super A, Super AV, Super C, Super H, Super M, Super MV, 300, 400, Super MTA, Super W4, Super W6 and some other early IH and McCormick Deering models. McCormick Deering: 10-20, 15-30, 22-36. 3/8" pipe thread. Two used per tractor, sold individually. Replaces 1998TA, OGC200 (Part No: 126590) ... $16.00

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Order EBU6734A if washer is needed. Replaces: 688067C1, 359875R1. (Part No: 126591) ... $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Part No: 140612) ... $1.70

Spin On Oil Filter Adapter Kit - This Spin On Oil Filter Adapter Kit Fits all Gas and LP, IH Combines: 105, 122, 140, 203, 62, 64, 76, 91, 93. Industrials: (I4, I6 Serial Number 4253 and up). Tractors: 300, 350, 400, 450, (A without hydraulics), B, BN, H, HV, (M, MV Serial Number 595394 and up), MTA, O4, (O6, W6 Serial Number 4253 and up), OS4, OS6, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, (T6, U6 Serial Number 5455 and up) ], (T6-61, U164, U4, UC248 Serial number 2327 and up), W4, W400, W450; For Replacement filter, order E7NN6714AA. Replaces: 538829R91 (Part No: 166373) ... $119.00

Category: PTO / Driveline

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

PTO Brake Band with Lining - This brake band is 1.495 inches wide and the lining is 0.120 inches thick. It is used on the following tractors with planetary PTOs: Super M, Super MTA, 300, 330, 340, 350, 400, 450, 460, 560, 660. Replaces: 359059R91, 365763R91, 373304R91, 373304R92. Two are used per tractor, sold individually. (Part No: 127409) ... $260.00

PTO Coupler, Used -

For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, Super M, Super MTA, 300, 300U, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (s/n 25999-earlier), 2504, 2544, 2606, 2656, 3388 (s/n 10384-earlier)
Replaces International OEM nos 360168R1
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 430248) ... $49.51

No
Picture

PTO Drive Shaft, Used -

For International tractor models Super M, Super MTA, 400 (with independant PTO), 450 (with independent PTO)
Replaces International OEM number 360468R1
25 Teeth
For a new version of this item use Item #: 112456
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435591) ... $96.01

PTO Safety Shield - For M, MD, Super M, Super MTA. PTO Safety Shield. (Part No: 103972) ... $56.00

PTO Seal - Measures 1.306 inch inside diameter, 2.220 inch outside diameter. THIS SEAL IS .312 InchES WIDE. VERIFY THE WIDTH OF YOUR OLD SEAL. YOU NEED TO INSTALL 2 OF THESE IF YOUR OLD SEAL IS WIDER. For tractor models Super A, H after serial number 118000, (M, MD, Super M, Super MTA and Super MD after serial number 59957), Late W4, W6, W9, Super W4, Super W6, Super W9, B250, B275, B414; Also fits the following models with transmission driven PTO (not Live PTO): MTA, 300, 330, 350, 354, 364, 384, 400, 424, 434, 444, 450, 454, 544, 600, 650, 2300, 3414, 3514, 3616. Replaces 3065217R91, 358772R91, 358812R91, 50702D, 372394R91, S90957, 708107R91. (Part No: 114730) ... $9.10

No
Picture

PTO Shaft Guard - PTO Shaft Guard attaches with a hose clamp that can be purchased locally. For A, B, Super A, Super AV, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 504, 544, 606 and with transmission driven type tractors: 330, 330, 350, 400, 450. PTO safety guard. (Part No: 103975) ... $17.50

PTO Shield, Used -

For International tractor models M, MD, Super M, Super MTA
Replaces International OEM number 66424DBX
For tractors with transmission driven PTO
For a new version of this item use Item #: 103972
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 403972) ... $40.01

PTO Shield, Used -

For International tractor models Super M, Super MTA, 300, 330, 350, 400, 450, 460, 560
Replaces International OEM number 360181R91
For tractors with independent PTO
Restoration quality
Made in the USA
For a new version of this item use Item #: 103974
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 429968) ... $36.01

No
Picture

Pto Shield - For M, Super M, Super MTA (Part No: 103972) ... $56.00

Category: Seats

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Pan Seat 4-Bolt Mount - Pan Seat with silver padded canvas. Center brass drain hole over metal pan seat frame. For: C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 3 50, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: 110069) ... $222.00

Pan Seat 4-Bolt Mount - Pan Seat with a red and white vinyl cover measures 22 inches wide and 19 inches long. For C, Super C, Super H, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: 101244) ... $157.00

Pan Seat 4-Bolt Mount - Black vinyl padded cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: 101245) ... $205.00

No
Picture

Pan Seat-Cushioned Silver Canvas Rail Mount, Used -

For International tractor models H, M, Super M, Super MTA
Replaces International OEM number 49498DE, 354156R92
Silver Canvas Powder Coated Red Finish Steel Core 1" Foam Cushion
Drain Hole
Rail Mount
For a new version of this item use Item #: 101249
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435283) ... $103.01

No
Picture

Seat Custom with Fold Up Arms - Black vinyl assy. with fold up arm rests fits, 1030, 1031, 1032, 1070, 1175, 1190, 1200TK, 1290, 1390, 1470TK, 200, 230, 240, 2504, 300, 330, 340, 350, 400, 404, 450, 460, 480B, 503, 504, 560, 580B, 600, 606, 650, 660, 730, 740, 830, 840, 870, 930, 940. MUST USE ADAPTER FOR FOLLOWING MODELS, A, B, C, H, HV, M, MDV, MD, MV, Super H, Super A, Super M, W9, WD9, WDR9, WR9S. (USE ADAPTER # CSA300). (Part No: 101387) ... $110.00

Seat Hinge Pin - Pin, hinge for tilt back seat bracket. Pin is 7 inches long and 3/8 inch diameter. Tractors: C, Super C, H and HV, Super H and HV~ M and MD, Super M and MTA~ Super W6 and W6TA~ 200, 230, 300, 340, 350, 400, 450, 560, 660. For 200, 230, 300, 340, 350, 400, 450, 460, 560, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super HV, Super M, Super MD, Super W6, W6TA. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. Replaces: Washer: 228280, Pin: 356892R2, Clip: 356893R2 (Part No: 179249) ... $11.64

Seat Locator Spring - This Seat Locator Spring fits: C, Super C, (Super H, Super HV serial number 19234 and up), (Super M, Super MD, Super MDV, Super MTA, Super MV serial number 28175 and up) Super MTA (Diesel serial number 28175 and up), 200, 230, 400, 450, 560, 600, 650, 660, Farmall Rowcrop: 300, 350, 460, Wheatland: 400, 450; Replaces: 352105R1. (Part No: 115150) ... $8.58

Seat Pan - Steel Black vinyl without drain hole Fits tractor models, 100, 140, 200, 230, 240, 300, 340, 350, 460 DSL, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTD, MV, Super H, Super M, W9, WD9, WDR9, WR9S (Part No: 191059) ... $200.00

No
Picture

Seat Pan - Steel Silver vinyl Fits Models, 100, 140, 200, 230, 240, 300, 340, 350, 460 DSL, 600, 650, A, AV, B, C, H, HV, M, MD, MDV, MTD, MV, Super H, Super M, W9, WD9, WDR9, WR9S. (Part No: 101246) ... $157.00

Seat Pivot Support Rod - This Seat Pivot Support Rod is 3 1/2 inches in length. Includes machine washers, rubber bushings, bolts and lock washers. (Part No: 105343) ... $20.60

Seat Shock - With Two Bolt Holes 7 1/4 When Compressed For C, Super C, Super H, M, Super M, Super MTA, 200, 230, 300, 350, 400, 450 with Mid Mounted Shock (Part No: 105340) ... $37.30

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Part No: 109602) ... $2.30

Seat Shock, Mid Mount - With one bolt hole and one stud 7 1/4 inch when compressed. For H (from serial number 281556), M (from serial number 165271), Super M, Super MTA with mid mounted shock. Replaces R3702, IHS465. (Part No: 105341) ... $40.00

Seat Spring - Cone Shape SPRING Measures 13 inches tall and 8.5 inches at base. For tractor models 200, 230, 300, 350, 400, 450, 460, 560, 600, 650, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super M, Super MTA. Replaces IHS030. (Part No: 101283) ... $28.20

Seat Support Pivot Rod - Rod that fits in the end of the Seat Support. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. (Part No: 105344) ... $23.30

Upper Bolster Shaft Horizontal Seal - This�upper bolster shaft horizontal seal has a 1.5 inch Inside Diameter, a 2.38 inch Outside Diameter and is 0.315 inch wide. It Fits: B-450, BM, BMD, M, MD, MDV, MTA, MTAV, MV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, 400, 450. Replaces: 103330R91, 289198, 338590R91, 357973R91, 357978R91, 359056R91, 359449R91, 359789R91, 360437R91, 364470R91, 364474R91, 367162R91, 58685D, 70259D, 703281R91, 708095R91, 80093H, 93516R91, 953019R1, 953020R1 (Part No: 121742) ... $12.00

Category: Sheet Metal / Body Parts

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

No
Picture

Battery Box - For Super H, Super M, Super MTA. Battery box for under seat is like original. Replaces OEM# 358693R91, 51707D. Made in the USA. Less Lid. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104003) ... $159.00

Battery Box - For Super H, Super M, Super MTA. Battery box, under seat location - not exactly like original. Universal mount. Less Lid. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 109386) ... $125.00

Battery Box Cover - Bare Metal-unpainted. For tractor models M, Super M, MD, Super MD, Super MTA Battery Box Cover. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104013) ... $38.80

Battery Box with Cover - For tractor models M, MD, Super M, Super MD. Battery Box with cover, under tank location. Replaces 51707D and 51713DBX_. Inside dimensions are 7 3/16 inches wide, 9 1/8 inches tall, 11 3/4 inches long. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 109383) ... $46.26

Battery Hold Down Rubber - The battery hold down rubber is3/4 inches tall, inserts into the retainers in the battery box lid. These are sold EACH. For tractor models Cub, Cub Lo-Boy, A, AV, B, (BN, C 51690D), AI, H, HV, M, MV, MD, MDV, W6, W9, WD6, Super A, Super C, Super H, Super HV, Super M, Super MTA, Super W6, 100, 130, 140, 200, 230, 600, 650. Replaces: 51690D. (Part No: 116587) ... $3.90

Fender - For Farmall H, Super H, M, Super M, Super MTA and 300, 350, 400, 450. This fender fits either left or right side. You must order two for a complete set. Mounting Plate and Spacer sold seperately. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 103988) ... $132.00

Fender - Right Hand or Left Hand, Used -

For International tractor models H, M, Super M, 300, 350, 400, 450
Replaces International OEM number 51500DB
Fits Left Hand Side
Fits Right Hand Side
For a new version of this item use Item #: 103988
Item ships via freight carrier please call 1-800-853-2651 for a freight quote
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 403988) ... $76.01

Fender Extension Mounting Kit - One kit used per tractor. For tractor models H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDTA, O4, Super W4, W6, WD6, Super W6, Super W6TA, W9, WD9, Super WD9, 100, 130, 140, 400, 230, 240, 300, 330, 340, 350, 400, 450. Fender mounting Kit includes 2 fender flat brackets with (34 Pieces) all mounting hardware. Replaces IHS364. (Part No: 103989) ... $89.00

Fender Mounting Plate - For Farmall H, Super H, M, Super M, For Farmall H, Super H, M, Super M, Super MTA and 300, 350, 400, 450. This fender mounting plate fits either left or right side. You must order two for a complete set/1 tractor. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 170252) ... $32.40

Fender Mounting Spacers - For Farmall H, Super H, M, Super M, For Farmall H, Super H, M, Super M, Super MTA and 300, 350, 400, 450. This fender mounting spacer fits either left or right side. Price is for each, must be ordered in multiples of 4. (Part No: 122092) ... $4.00

Grille Assembly, Used -

For International tractor models Super M (s), Super MTA (s)
Replaces International OEM number 59516DE
For a Premium Used version of this part use Item #: 329872
Item ships via freight carrier please call 1-800-853-2651 for a freight quote
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 429872) ... $234.01

No
Picture

Grille Screen -

For International / Farmall tractor models A, B, C, Cub (s/n 222500-earlier with round hood / grille), Cub Lo-Boy (s/n 17200-earlier with round hood / grille), H, HV, I4, I6, I9, M, MD, MTA, O4, O6, O9, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MTA, W4, W6, W9, 100, 130, 140 (s/n 23300-earlier), 200, 230, 240, 300, 330, 340, 350, 400, 450, 460, 560, 600, 650, 660
Size: 2' x 3' with 5 squares per inch
Wire Grille Screen Clips use Item #: 108001
Additional Handling and Oversize Fees Apply To This Item

(Part No: 112471) ... $18.50

Lower Grill Insert With Screen - For M, Super M, MV, MD, MDV, Super MTA. Lower Grill Insert With Screen replaces . (Part No: 103940) ... $40.30

Toolbox - Light bar mount, includes decals and brackets. For tractor models H, M, MD, MTA, Super H, Super M, Super MD, Super MTA (Part No: 103984) ... $121.00

Wire Grille Screen Clips - 6 pack -

For International / Farmall tractor models A, B, C, Cub, H, M, Super A, Super C, Super H, Super M, Super W4, Super W6, Super W9
Sold in packs of 6

(Part No: 108001) ... $7.10

Category: Steering

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Axle - Heavy duty main axle assembly includes bushings. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. Additonal $45 shipping due to weight. (Part No: 120010) ... $910.00

No
Picture

Axle Carrier, Used -

For International tractor models M, MD, Super M, Super MTA, 300, 350, 400, 450, 560
Replaces International OEM nos 6727DBXA
Replaces International Casting nos 6727DB
Except HI-Clearance Models
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 444996) ... $46.01

Axle Center Tube - For all models listed with factory IH wide front with tie rods behind center tube: H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, 1026, 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 666, 706, 756, 806, 826, 856 Axle Center Tube with bushings (48841D) is 42 1/2 inches long and 4 1/2 inches in diameter. Replaces: 358976R31, 383926R21, Bushing: 48841D (Part No: 109489) ... $450.00

No
Picture

Axle Extension Tube - Standard duty, 11-5/8". For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 108809) ... $207.00

No
Picture

Axle Extension Tube - schwartz part (Part No: 110830) ... $229.00

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 11-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 111582) ... $351.00

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 9-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 172645) ... $403.00

Axle Pivot Pin Bushing - This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a WIDE FRONT axle pivot pin bushing for factory adjustable wide front axle and tie rods behind the axle: 1026, 1256, 400, 450, 660, 666, 300, 350, 460, 544, 560, 656, 706, 756, 806, 826, 856, H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, Super MDTA, Super MTA, W400, W450. Replaces 48841D (Part No: 109669) ... $13.70

Bolster Pivot Pin - 1 1/4 inch diameter, 8 1/2 inches long. If you need a 1 1/2 inch Diameter Pin, order 379941R1. For tractor models H, Hydro 70, M, MD, MTA, Super H, Super M, 1206, 1256, 400, 450, 460, 544, 560, 656, 666, 686, 706, 756, 806, 826, 856. Replaces 358978R1, 358978R2 (Part No: 109487) ... $27.60

Bracket, Belt Driven Power Steering Pump - Bracket bolts to the left side of the engine above the governor. For tractor models M, MV, Super M, Super MV, MTA, 400, 450, W6, Super W6, W6TA, W400, W450. (Part No: 115153) ... $90.00

Char-Lynn 217-1015 Power Steering Motor -

For International / Farmall tractor models M, Super M, Super MTA, 400, 450 (gas and LP Only)
Replaces International OEM number 217-1015, S101-F
For Tractors with Char-Lynn power steering conversion kits, not for tractors with factory power steering
Use port block 111506
Use bracket 111414
Torque Output at 1000 PSI 700 in lbs
Rated Operating Pressure 1000 PSI
Operating Speed at 3 GPM 108 RPM
Recommended Fluid Input 2.5 to 3 GPM
Torque Generator

(Part No: 111933) ... $1659.01

No
Picture

Char-Lynn E58-121 Power Steering - Bracket -

For International / Farmall tractor models H, M, Super M, Super MTA
Replaces International OEM number E58-121, 121
Use with 111933 Torque Generator

(Part No: 111414) ... $67.00

Front Axle Assembly, Wide, Heavy Duty - For M, Super M, MTA, 400, 450. Includes 6 bolt hubs with 6 inch bolt circle and 4.62 inch pilot diameter hole, bearings and seals are also included. Heavy Duty Front Axle with hubs and mounting parts. Width on wide axles are adjustable from 60 inches to 86 inches. Additional $ 100.00 shipping due to the weight of this item, 320 pounds. (Part No: 119998) ... $3119.01

Front Axle Clamp Pin -

For International / Farmall tractor models H, HV, Hydro 70, Hydro 100, Hydro 186, M, MD, Super H, Super M, 300, 350, 400 (FARMALL), 450, 460, 544, 560, 656, 660, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256
Compatible with International Construction and industrial models 21206, 21256
Replaces Case IH OEM number 350557R1
0.739" Dia.
6.616" Long
1.125" Head
For applications with steel center axle tube, but depending on the model it can be used on standard and high center front axle.
With adjustable wide front axle

(Part No: 158235) ... $11.20

No
Picture

Front Saddle Assembly - Fits Schwartz front end ONLY. For tractor models 300, 350, 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, H, M, MTA, Super H, Super M. (Part No: 172611) ... $311.00

No
Picture

Heavy Duty Front Axle Complete with Hubs - REPLACES: HDUH4000 NOTE: HDUH models include 6 bolt hubs with 6 inch bolt circle and 4.62 inch pilot diameter hole, bearings and seals are also included. Fits on models: 400, 450, M, MTA, Super M. (Part No: 119998) ... $3119.01

Oil Seal - Oil seal for bearing kit FW113FS. External Lip, Spring Loaded, Closed Case Seal, 2.786 in od, 1.75 in id, and .294 in wide. For Tractors H, Super H, M and MD, 4, Super W4, 300, 350. For 2606, 300, 350, 4, 460, 504, 606, H, M, MD, Super H, Super M, Super MD, Super W4. Check measurements. (Part No: 110745) ... $9.90

No
Picture

Pivot Pin 4-3\16 - For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 110958) ... $35.00

Pivot Pin Bushing Schwartz 60304 -

For International / Farmall tractor models H, M, Super M, Super MTA, 300, 350, 400, 450, 504, 544, 560, 606
Replaces International OEM number 60304
Used on Wide Front conversion Kits.
O.D.: 1.5"
I.D.: 1.251"
Length: 1.37"

(Part No: 108886) ... $8.70

Pivot Pin Jam Nut -

For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706
Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020
Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650
1-1/4" Diameter

(Part No: 108889) ... $8.30

No
Picture

Pivot Pin, 6-11\16 - For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super M, Super H. (Part No: 110959) ... $12.80

Power Steering Mounting Bracket - International -

For International / Farmall tractor models M, Super M, Super MTA
For Char-Lynn Torque Generator

(Part No: 115152) ... $87.00

Power Steering, Pulley - Crankshaft Drive Pulley for Char-Lynn Power Steering. Used on gas and LP models: M, Super M, MTA, MV, Super MV, Super W6, W6, W6TA, 400, W400, 450, W450. Replaces Char-Lynn 5515 (Part No: 109569) ... $104.00

Rear Saddle Assembly -

For International / Farmall tractor models M, Super M, Super MTA, 400, 450
Replaces International OEM number 3048

(Part No: 112554) ... $287.00

Rear Support Bushing -

For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856
Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020
Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, 1850
Replaces OEM number 60305

(Part No: 110729) ... $6.60

Replacement Plug -

For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706
Replaces International OEM number 1389

(Part No: 108806) ... $7.06

Spindle -

For International / Farmall tractor models M, Super M, Super MTA, 400, 450
Compatible with John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020
Replaces manufacturer number 9617
Vertical Length: 13-3/8"
Shaft Diameter: 1-3/4"
Spline Diameter: 1-5/8"
Splines: 6
Seal Diameter: 2"
Inner Bearing Diameter: 1.795"
Outer Bearing Diameter: 1.374"

(Part No: 110126) ... $219.00

Spindle -

For International / Farmall tractor models M, Super M, Super MTA, 400, 450
Replaces manufacturer number 3033
Vertical Length: 13-3/8"
Shaft Diameter: 1-5/8"
Spline Diameter: 1-5/8"
Seal Diameter: 2"
Outer Bearing Diameter: 1.375"
Inner Bearing Diameter: 1.688"

(Part No: 110267) ... $251.00

Spindle - Left Hand, Used -

For International tractor models M (Late), Super M, 400, 450 (with OEM Wide Front Axle)
Replaces International OEM number 360407R91
Left Side Spindle
Upright Shaft Length: 14.562"
Upright Shaft Diameter: 1.667"
Inner Bearing Diameter: 1.688"
Outer Bearing Diameter: 1.375"
For a new version of this item use Item #: 104341
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 404341) ... $142.01

Spindle - Right Hand, Used -

For International tractor models M (Late), MTA (Late), Super M, 400, 450 (with OEM Wide Front Axle)
Replaces International OEM number 360408R91
Right Side Spindle
Upright Shaft length 14.562"
Upright Shaft Diameter: 1.667"
Inner Bearing Diameter: 1.688"
Outer Bearing Diameter: 1.375"
For a new version of this item use Item #: 104342
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 404342) ... $141.01

Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. (Part No: 102175) ... $9.70

No
Picture

Spindle Bushing -

For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856
Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 3010, 3020, 4000, 4010, 4020
Replaces OEM number 7469, 1139-61539, A24K, B1A24K
For Heavy Duty Wide Front Ends
Length: 1.502"
OD: 2.002"
ID: 1.755"

(Part No: 108895) ... $14.40

Spindle, LH - Fits Tractor Models: 400, 450 with OEM WIDE FRONT, M LATE, MTA, Super M. (Part No: 104341) ... $144.00

Spindle, Schwartz, Used -

For International tractor models M, Super M, Super MTA, 400, 450
Compatible with John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020
Replaces OEM number 9617, AM9617
Schwartz
For a new version of this item use Item #: 110126
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 410126) ... $149.01

Spindle-RH - Fits Tractor Models 400, 450 with OEM WIDE FRONT, M LATE, MTA, Super M. (Part No: 104342) ... $290.00

Stay Ball Cap, Used -

For International tractor models H, Hydro 70, Hydro 86, M, Super H, Super M, Super MTA, 544, 560, 656, 666, 706, 756, 806, 856, 1026, 1206, 1256, 1456, 2544, 2706, 2826, 2856, 21026, 21206, 21256
Replaces International OEM number 60763DB
For a new version of this item use Item #: 108884
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 408884) ... $7.56

Stay Rod Assembly - Stay Rod Assembly "Wishbone" fits wide front end tractors. For tractor models 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, H, Hydro 70, M, Super H, Super M, Super MD. Replaces 10546D, 360405R11 VERIFY PART NUMBER IN PARTS MANUAL FOR YOUR TRACTOR. (Part No: 167990) ... $505.00

No
Picture

Stay Rod Assembly, Used -

For International tractor models H, M, MD, Super H, Super M
Replaces International OEM nos 40082DX
Adjustable Wide Front Axle
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 429598) ... $234.01

Stay Rod Assembly, Used -

For International tractor models H, HV, M, MD, Super H (s/n 19234-later), Super M (s/n 60001-later), 300, 350, 400, 450, 460, 544, 560, 656, 660, 706, 756, 806, 826, 856, 1026, 1206, 1256, 2544, 2706, 2826, 2856, 21026, 21206, 21256
Replaces International OEM number 360405R11
Wishbone
Adjustable Wide Front Axle
For a new version of this item use Item #: 167990
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 429882) ... $325.01

Steering Arm - Left Hand, Used -

For International tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 806, 856
Compatible with John Deere tractor models 60 (2 piece pedestal), 70 (2 piece pedestal), 620 (2 piece pedestal), 630 (2 piece pedestal), 720 (2 piece pedestal), 730 (2 piece pedestal), 2510, 2520, 3010, 3020, 4000, 4010, 4020
Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650
Replaces OEM number 2130
Schwartz
For a new version of this item use Item #: 109364
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 454518) ... $47.01

Steering Arm - Right Side, Used -

For International tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856
Compatible with International Header(s) 700
Compatible with International Harvester(s) 730, 830
Compatible with International Planter(s) 800
Compatible with International Tillage(s) 700
Compatible with International Hay Cutting(s) 730
Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020
Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650
Replaces OEM number 2129
Right Hand
Schwartz
For a new version of this item use Item #: 108808
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 454517) ... $47.01

No
Picture

Steering Arm, LH - Left hand for a Schwarts front end. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 109364) ... $93.00

No
Picture

Steering Arm, RH - Right Hand for a Schwarts front end. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 108808) ... $91.00

Steering Bracket Assembly -

For International / Farmall tractor models H, M, MTA, Super H, Super M, 300, 350, 400, 450, 460, 544, 560, 656, 706, 756, 806, 856
Replaces International OEM number 3049

(Part No: 110829) ... $100.00

Steering Sector Worm Gear, Used -

For International tractor models M, Super M, Super MTA, 400, 450
Replaces International OEM number 50037DB
Teeth: 32
For a new version of this item use Item #: 124445
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435848) ... $110.01

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Part No: 115351) ... $11.00

Steering Universal Joint - For tractor models H, Super H, M, Super M, 300, 350, 400, 450. Steering Universal Joint complete joint with yokes, pins and grease fitting. 7/8 inch ID. Not for Keyed yokes. (Part No: 127570) ... $123.00

Steering Wheel - 17-5/8 inch diameter, 3/4 inch hub, for keyed shaft. 3 Spoke. Super A serial number 356000 and up, C, Super C, H, Super H, M, Super M, MD, W4, Super W4, W6, Super W6, W9, 100, 130, 200, 230, 240 and 300, 350, 400, 450 without Power Steering. Metal Spokes. Replaces IHS328. (Part No: 101429) ... $43.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Part No: 157780) ... $1.00

Steering Worm Bearing Retainer - This Worm Bearing Retainer is 2.1875 inches in diameter and has 12 right hand threads. For models 2404, 2424, 2444, 2504, A, AV, B, BN, C, H, HV, M, MD, MDV, MV, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 404, 424, 444, 450, 504. (Part No: 173004) ... $42.60

Steering Worm Gear, Sector - 32 teeth. For tractor models 400, 450, M, Super M, Super MTA. The style of this gear is full circle. This gear has 32 teeth. It can also replace a 19 tooth sector (1/2 inch moon style). Replaces: 50037DA, 50037DB, 704168R1. (Part No: 124445) ... $160.00

Steering Worm Shaft - This Steering Worm Shaft is 46-1/2 inches overall length with 3/4 inch NF thread. This shaft will NOT fit diesels UNLESS customer lengthens the shaft. Fits: (M, MV gas, LP), (MTA, MTAV, Super M, Super MTA, Super MV, Super MVTA gas, LP; up to serial number F52627 or L512541), (400 LP only; with 22 inch tank; serial number 21804 and up without factory power steering), (450 LP only; with 22 inch tank; up to serial number 13135 without factory power steering). Replaces shaft: 50052DB and 50052D. (Part No: 151915) ... $192.15

Steering Worm Shaft Bearing - This Steering Worm Shaft Bearing has a 0.984 inch inside diameter, a 2.047 inch outside diameter and a 0.590 inch width. Fits B, BM, BN, C, H, HV, M, MD, MDV, MTA, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV-TA, Super MTA, Super MV, Super MVTA, 200, 230, 400, 450, Super MTA, (424, 444 used as a steering worm shaft bearing; without power steering), 240, 300, 340, 350, 404, 504, 240, 404. Replaces: 1271857C91, 1273146C91, 210041, 43357D, 69696D, 741-0360, 741-3037, 941-3037, ST225, ST225AT, ST225B, ST225BT, ST225Y, ST678. (Part No: 178091) ... $9.60

Steering Worm Shaft Oil Seal - This Steering Worm Shaft Oil Seal measures 1.000 inch inside diameter, 1.503 inch outside diameter, 0.250 inch wide. Fits B, BN, C, H, HV, M, MD, MDV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDV-TA, Super MV, Super MVTA, 200, 230, 240, 400, 450, MTA diesel, 300, 340, 350. Replaces: 359042R91, 359257R91, 364468R91, 43800D, 43800DA, 488561R91. (Part No: 122678) ... $5.80

No
Picture

Steering Worm Shaft, Used -

For International tractor models M (gas, LP), MTA (gas, LP, s/n F52627-earlier or L512541), Super M (gas, LP), Super M (gas, LP, s/n F52627-earlier or L512541), Super MTA (gas, LP), Super MTA (gas, LP, s/n F52627-earlier or L512541), 400 (gas, LP), 400 (LP only, with 22" tank, s/n 21804-later, without factory power steering), 450 (LP, with 22" tank, s/n 13135-earlier without factory power steering)
Replaces International OEM number 50052DB, 50052D
46-1/2" Overall length
3/4" NF Thread
For a new version of this item use Item #: 151915
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435212) ... $124.01

Thrust Bearing - For tractor models 684, 685, 685XL, 686, 695, 695XL, 706, 756, 766, 782, 784, 786, 806, 826, 856, 86 SERIES with AXLE PIVOT BALL, NOT PIN), 88 SERIES EARLY with AXLE PIVOT BALL, NOT PIN), 884, 885, 885XL, 886, 895, 895XL, 966, 986, H, HV, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86, M, MTA, Super H, Super HV, Super M. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Part No: 102174) ... $12.80

Thrust Bearing, Axle - Standard duty. Fits Schwartz/Speeco type front ends. For tractor models 300, 350, (354, 364 last serial number models), 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, (B414 last serial number models), H, M, MTA, Super H, Super M. Replaces OEM number 392671M91. Also replaces SCHWARTZ part number 60351. (Part No: 107048) ... $21.10

Tie Rod Assembly - Using this tie rod assembly for the models listed will take modification, but it is the only one available for factory original row crop models: H, M, MD, MTA, Super H, Super M, Super MD, Sure MTA, 300, 350, 400, 450. This tie rod assembly tapered ball stud measures 0.675 inch to 0.762 inch at the widest point of the taper shaft, with 5/8-18 thread. The tie rod is adjustable to a maximum of 34-1/4 inches and a minimum of 20-7/8 inches. Fits factory INTERNATIONAL wide front axles only (with tierods behind the center axle.) Will NOT fit Swartz, Norden, Speeco, or other aftermarket wide front axles. To make this assembly work for these applications, the center tube must be shortened about an inch. We do not have instructions for doing this modification. This part can not be returned if you make modifications to the tube. Contains the following items: 359984R93 Tie Rod- Outer, 359986R1 Clamp, 374062R1 Jam Nut, 383917R1 Tube, 384006R92 Tie Rod- Inner. (Part No: 100869) ... $82.00

Tie Rod Tube - Tube only. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 108807) ... $31.50

Tie Rod Tube -

For International / Farmall tractor models Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856
Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020
Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650
Replaces OEM number 22514

(Part No: 110782) ... $48.60

Tie Rod Tube Kit - For a Swartz front end. Kit includes, 1 tie rod tube, 1 plug, 1 ball stud, 2 1/8 inch cotter pins, 1 dust seal. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 112262) ... $71.00

Tie Rod, DU Axle - Used on Schwartz front ends, this is a sealed (New Style) Tie Rod. It measures 18.750 inches from center of ball joint to end of rod. The rod has a 1 inch diameter. (Part No: 108804) ... $62.00

No
Picture

Tie Rod, Inner - Inner tie rod with jam nut, seal and stud nut. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 103164) ... $35.00

No
Picture

Wide Front Lock Tab, Used -

For International tractor models Hydro 70, Hydro 86, M, Super M, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2706, 2826, 2856, 21026, 21206, 21256
Replaces International OEM number 358345R1
For a new version of this item use Item #: 111255
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435534) ... $7.51

Category: Wheels

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Bearing Cone - Inner cone for bearing kit FW113FS. Tractors H, Super H, M and MD, 4, Super W4, 300, 350. For 300, 350, 4, H, M, MD, Super H, Super M, Super MD, Super W4 (Part No: 172828) ... $15.80

Bearing Cup - Inner cup for bearing kit FW113FS. Tractors H, Super H, M and MD, 4, Super W4, 300, 350. For 300, 350, 4, H, M, MD, Super H, Super M, Super MD, Super W4 (Part No: 172841) ... $9.00

Clamp Lock Nut - Wheel Clamp Lock Nut. 7/8-14 thread. Fits front wheel on tractors: H, Super H~ M, Super M~ B275, 300, 350, 400, 450, 460, 560. For 300, 350, 400, 450, 460, 560, B275, H, M, Super H, Super M (Part No: 109854) ... $18.00

No
Picture

Front Wheel Hub-6 Bolt - NOTE : This hub allows changing old style IH narrow front cast whl and hub to a standard 6 bolt. Hub uses standard wheel bearings and seals. Fits tractor models 400, M, and Super M. (Part No: 104501) ... $169.00

Rear Rim - Models H, M, Super H, Super M - Deep drop center, 10" x 38". For tractor models H, M, Super H, Super M, early 300 and 400. DOES NOT INCLUDE HUB. Must be shipped by truck freight. (Part No: 178554) ... $581.00

No
Picture

Rear Rim - Models H, M, Super H, Super M - Deep drop center, 14" x 38". For tractor models H, M, Super H, Super M, early 300 and 400. DOES NOT INCLUDE HUB. Must be shipped by truck freight. (Part No: 178555) ... $751.00

Rear Wheel Clamp - This Rear Wheel Clamp is used on Farmall: H, M, MD, Super M, 400, 450. Many of these tractors used more than one style clamp. This is a 4 bolt clamp for 2 3/4 inch axles. Verify size before ordering. Replaces 6326DC. Price is for one piece. Image shows both sides. (Part No: 190564) ... $149.00

Rear Wheel Clamp, Used -

For International tractor models M, MD, MDV, MV, Super M, 400, 450
Replaces International OEM number 6326DC
4 Bolt Clamp
2 3/4" Axle
For a new version of this item use Item #: 190564
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 498630) ... $55.01

Rear Wheel Rim Clamp Bolt -

For International / Farmall tractor models H, HV, M, MD, MTA, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super W9, W4, W6, W9, WD9, 300, 400 (s/n 5180-earlier)
Replaces International OEM number 48985DA, 13491R1
4.25" x 5/8" NC
Square head 1"
Grade 5
Single Dot Square Head

(Part No: 126624) ... $15.50

No
Picture

Rear Wheel Rim Clamp Bolt, Used -

For International tractor models H, HV, M, MD, MTA, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super W9, W4, W6, W9, WD9, 300, 400 (s/n 5180-earlier)
Replaces International OEM number 48985DA, 13491R1
4.25" x 5/8" NC
Square head 1"
Grade 5
Single Dot Square Head
For a new version of this item use Item #: 126624
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 435897) ... $8.01

Rim Clamp, Used -

For International tractor models H, HV, M, MD, Super H, Super HV, Super M, Super MTA, 300, 350, 400, 450, 560, 660
Replaces International OEM nos 48984D
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 496585) ... $5.01

Rubber Bushing -

For International / Farmall tractor models A, B, C, Cub (Lo-Boy), H, I4, O4, O6, Super A, Super C, Super M, Super W4, Super W6, W4, 100, 130, 140, 200, 230
Replaces International OEM number 51689D

(Part No: 126648) ... $3.70

Rubber Bushing Retainer -

For International / Farmall tractor models A, B, C, Cub, H, I4, O4, Super A, Super C, Super H, Super M, Super W4, Super W6, Super W9, W4, W6, 100, 130, 140, 200, 230, 600, 650
Replaces International OEM number 50942D

(Part No: 126651) ... $4.00

Wheel Hub, Used -

For International tractor models H, M, Super H, Super M, 300, 350
Replaces International OEM nos 8274D
Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.

(Part No: 498922) ... $89.01

Category: Accessories / Supplies

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: 182644) ... $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: 178758) ... $97.00

Category: Decals and Emblems

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Part No: 183484) ... $15.80

Decal, IH Block - "IH" logo, 11 inches. (Part No: 183564) ... $17.40

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Part No: 101094) ... $6.40

Decal, IH Block - "IH" logo, 1 3/4 inch. (Part No: 183266) ... $5.00

Decal, IH Block - "IH", 1 1/4 inch Logo . (Part No: 183058) ... $3.90

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Part No: 183292) ... $25.80

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Part No: 183123) ... $30.50

Decal, IH Block - "IH" logo, 10 inches. (Part No: 183276) ... $36.60

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Part No: 183334) ... $2.60

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Part No: 183338) ... $3.90

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Part No: 183347) ... $5.00

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Part No: 183352) ... $14.20

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Part No: 183255) ... $7.50

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Part No: 183265) ... $16.60

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Part No: 183547) ... $12.40

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Part No: 183556) ... $14.80

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Part No: 183560) ... $14.20

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Part No: 183543) ... $25.50

International Decal - 8-1/2 inch long, white with black outline. (Part No: 183068) ... $9.40

International Decal - 23 inches long, black block letters. (Part No: 183477) ... $12.40

International Decal - 23 inches long, white with black outline. (Part No: 183478) ... $16.60

International Decal - 26 inches long, black block letters. (Part No: 183481) ... $14.80

International Decal - 26 inches long, white with black outline. (Part No: 101032) ... $14.00

International Decal - 29 inches long, black block letters. (Part No: 101030) ... $10.50

International Decal - 29 inches long, white with black outline. (Part No: 101033) ... $17.50

Category: Electrical System

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: 178026) ... $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 173326) ... $25.20

No
Picture

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 111377) ... $99.00

No
Picture

Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28) ... $35.98

No
Picture

Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72) ... $53.81

No
Picture

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 182583) ... $49.20

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Part No: 108299) ... $62.15

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: 182504) ... $19.20

No
Picture

Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: 179437) ... $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: 182459) ... $4.80

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Part No: 150223) ... $19.20

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: 182608) ... $16.80

Tag for Starter\Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: 182606) ... $16.80

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Part No: 105581) ... $26.50

Category: Engine Gaskets

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: 178141) ... $10.90

Category: Engine Parts
Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Category: Engine Rings
Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Category: Exhaust System

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 118823) ... $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 119038) ... $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 114858) ... $132.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 173286) ... $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 173287) ... $163.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 114945) ... $147.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 119080) ... $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 173281) ... $88.00

Muffler Clamp, 1-1\4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Part No: 182682) ... $2.10

Muffler Clamp, 1-3\4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Part No: 108866) ... $4.80

Muffler Clamp, 1-3\8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Part No: 182687) ... $2.90

Muffler Clamp, 2-1\4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Part No: 108870) ... $5.30

Muffler Clamp, 2-3\4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Part No: 108872) ... $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Part No: 108873) ... $7.40

Muffler Clamp, 3-1\2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Part No: 108874) ... $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Part No: 108875) ... $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Part No: 118841) ... $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: 108632) ... $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: 108633) ... $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: 108635) ... $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Part No: 108636) ... $11.08

Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: 108645) ... $13.80

Rain Cap - This rain cap is for a 4.50 inch pipe. (Part No: 108749) ... $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Part No: 108750) ... $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: 179749) ... $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: 185428) ... $8.50

Category: Fuel System / Air Intake

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Part No: 151026) ... $14.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: 114940) ... $9.92

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Part No: 117537) ... $29.80

Sediment Bowl Gasket, 2-1\8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: 112364) ... $3.30

Category: Gauges

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

No
Picture

Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Part No: 178963) ... $30.00

No
Picture

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: 178318) ... $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: 178285) ... $42.30

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Part No: 110849) ... $49.57

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 179540) ... $16.00

Category: Hitch / Drawbar

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Part No: 184153) ... $364.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Part No: 184167) ... $364.00

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Part No: 179611) ... $439.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Part No: 179008) ... $439.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: 182461) ... $11.40

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: 112156) ... $37.00

Category: Hydraulic System

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Filter Element - 25 Micron replacement element for SF1-25. (Part No: 182541) ... $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Part No: 120092) ... $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Part No: 118257) ... $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Part No: 179906) ... $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Part No: 118256) ... $13.80

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Part No: 118259) ... $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Part No: 118261) ... $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: 172285) ... $13.50

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Part No: 172338) ... $13.40

Category: Implements

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 170217) ... $14.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 169771) ... $7.86

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 114630) ... $5.90

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 173612) ... $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: 161111) ... $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 180514) ... $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: 182627) ... $49.30

No
Picture

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 182589) ... $51.00

No
Picture

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 182589) ... $51.00

No
Picture

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 182592) ... $91.48

No
Picture

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 182594) ... $111.54

No
Picture

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 152690) ... $78.00

No
Picture

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 182593) ... $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 180300) ... $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 111222) ... $56.00

No
Picture

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: 107928) ... $22.70

Category: Lights

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 112415) ... $42.80

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 112414) ... $43.10

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Part No: 111227) ... $13.50

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH) ... $75.13

No
Picture

Sealed Beam Light - 6 Volt (Part No: 111938) ... $40.00

No
Picture

Sealed Beam Light - 12 Volt (Part No: 122080) ... $36.00

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: 114720) ... $16.60

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: 173803) ... $38.40

Category: Miscellaneous

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Part No: 186987) ... $389.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: 178876) ... $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: 180453) ... $24.60

Tractor Umbrella with Frame & Mounting Bracket - Red -

Complete umbrella consisting of a cover, bracket and frame
54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets
Metal parts are zinc-coated for long-lasting, maintenance-free service
Rigid framework for cover is built to withstand farm and industrial use
Installs easily, folds down for trailering and removes in seconds without tools

(Part No: 161193) ... $123.00

Category: PTO / Driveline

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Part No: 180775) ... $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: 124815) ... $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: 183648) ... $268.00

Category: Paint

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: 183950) ... $24.00

No
Picture

Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100244) ... $8.50

No
Picture

Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100244) ... $8.50

No
Picture

Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 108409) ... $65.00

No
Picture

Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 108408) ... $29.30

No
Picture

Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 101108) ... $55.00

No
Picture

Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 101107) ... $24.60

No
Picture

Paint, Farmall Red, Spray Can - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100720) ... $8.50

No
Picture

Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100116) ... $53.00

No
Picture

Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100115) ... $24.00

No
Picture

Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100114) ... $8.70

No
Picture

Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100121) ... $22.40

No
Picture

Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: 100120) ... $8.30

No
Picture

Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 101114) ... $58.00

No
Picture

Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 101113) ... $24.00

No
Picture

Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 101112) ... $8.90

No
Picture

Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100722) ... $56.00

No
Picture

Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100721) ... $24.00

No
Picture

Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100720) ... $8.50

No
Picture

Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 108401) ... $90.00

No
Picture

Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 108400) ... $35.00

No
Picture

Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 108399) ... $11.00

No
Picture

Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 101117) ... $62.00

No
Picture

Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 101116) ... $24.90

No
Picture

Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 101115) ... $8.20

No
Picture

Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100119) ... $59.00

No
Picture

Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100118) ... $24.00

No
Picture

Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100254) ... $24.00

No
Picture

Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100253) ... $8.50

No
Picture

Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100254) ... $24.00

No
Picture

Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100253) ... $8.50

No
Picture

Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 184741) ... $84.67

No
Picture

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL) ... $68.39

No
Picture

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT) ... $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: 185598) ... $40.01

Category: Seats

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V) ... $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056) ... $2161.57

Tie-On Seat Cover - Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Part No: 178995) ... $43.80

Tie-On Seat Cover - Red and White, 21" wide. Deluxe with 2 inches of foam. (Part No: 178155) ... $38.60

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Part No: 101375) ... $100.00

Category: Sheet Metal / Body Parts

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: 165963) ... $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Part No: 186563) ... $173.00

Category: Steering

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Part No: 113730) ... $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Part No: 111126) ... $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Part No: 164438) ... $47.60

Category: Tools

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

No
Picture

Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: 183798) ... $23.10

No
Picture

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: 180261) ... $287.00

Category: Wheels

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 364343R92 (Part No: 103768) ... $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Part No: 116854) ... $76.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Part No: 118299) ... $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Part No: 118295) ... $19.10

No
Picture

Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Part No: 178957) ... $57.00

No
Picture

Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Part No: 158249) ... $63.00

No
Picture

Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Part No: 178895) ... $111.00

No
Picture

Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Part No: 184736) ... $67.00

No
Picture

Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. (Part No: 183819) ... $82.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Part No: 118213) ... $107.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Part No: 118213) ... $107.00

Category: Tune-up DVD

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Farmall MTA - Tune-up DVD - Includes rebuilding the carburetor and distributor, oil and filter change, brake adjustment, troubleshooting and more. Step-by-step instructions. Information also pertains to the Farmall H, Super H, M, Super M, 300 & 400 Series, McCormick W and O Series and International I Series Tractors (Part No: JDV-00850) ... $24.00

Category: Rebuild

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

Farmall MTA - Rebuild - Shows how to completely rebuild the tractor's engine. You'll see the engine disassembled down to the bare block and then rebuilt step-by-step in an easy-to-follow format. With information pertaining to the Farmall H, Super H, M, Super M, Super MTA, 300 & 400 Series, McCormick W and O Series and International I Series Tractors (Part No: JDV-00750) ... $24.00

Category: Hat

Prices effective May 18, 2024. Catalog pricing and product availability subject to change without notice. Visit our website for the most current prices or call.

IH Red Hat with Black Brim - With black brim and IH logo. (Part No: 183945) ... $14.99

IH Solid Red Hat - With IH logo. (Part No: 184041) ... $14.99

Charcoal Hat with Black Brim - With embroidered Farmall H or M style tractor. (Part No: 140676) ... $22.99

Farmall Super M Parts List

Yesterday's Tractor Co.www.yesterdaystractors.com(800) 853-2651

Category: Brakes

Category: Clutch

Category: Cooling System

Category: Decals and Emblems

Category: Drive Train

Category: Electrical System

Category: Engine Bearings

Category: Engine Gaskets

Category: Engine Rebuild Kits

Category: Engine Parts

Category: Engine Pistons and Sleeves

Category: Engine Rings

Category: Exhaust System

Category: Fuel System / Air Intake

Category: Gaskets

Category: Gauges

Category: Hitch / Drawbar

Category: Hydraulic System

Category: Lights

Category: Oil System

Category: PTO / Driveline

Category: Seats

Category: Sheet Metal / Body Parts

Category: Steering

Category: Wheels

Category: Accessories / Supplies

Category: Decals and Emblems

Category: Electrical System

Category: Engine Gaskets

Category: Engine Parts

Category: Engine Rings

Category: Exhaust System

Category: Fuel System / Air Intake

Category: Gauges

Category: Hitch / Drawbar

Category: Hydraulic System

Category: Implements

Category: Lights

Category: Miscellaneous

Category: PTO / Driveline

Category: Paint

Category: Seats

Category: Sheet Metal / Body Parts

Category: Steering

Category: Tools

Category: Wheels

Category: Tune-up DVD

Category: Rebuild

Category: Hat

Yesterday's Tractor Co.www.yesterdaystractors.com(800) 853-2651

Yesterday's Tractor Co.
www.yesterdaystractors.com
(800) 853-2651

Yesterday's Tractor Co.
www.yesterdaystractors.com
(800) 853-2651